#lounge
1 messages ยท Page 208 of 1
use the one which gives contact to the chips without applying too much pressure
you could also use the heatspreader which was designed for your laptop
and is screw mounted for a good reason
It it even a good idea to remove the thermal pads after they're placed?
I mean my laptop had a much worse ssd
So if it can get away with a bad thermal pad maybe this one wouldn't?
for reaching temps that the heatsink is really necessary you'll have to write a bunch of GB or read even more
which you usually dont in normal usage
and then the ssd also throttles itself if it should really get too hot
I'm going to copy over 500GB worth of data to migrate
yeah and?
It will just slow itself down so it doesn't melt.
๐คทโโ๏ธ
Yeah I know
beside the fact that theres probably nothing with enough bandwidth to even stress the ssd with writing so much
Thank god for that lol
even with full saturated usb 3 that thing will be bored
I'll put the other nvme pci 4 on a usb 3.2 gen 2 port to copy data over it will probably throttle but I'm just trying to figure out what's optimal
If moving the new thermal pad over is better or if I should just leave the same thermal pad it had with the old ssd
i would use the one which fits best
you dont gain much from a thinner pad if it doesnt have proper contact to the flash chips
neither is a too thick pad good
A huge area of the new ssd isn't covered by the green thermal pad
I think the blue one would be better
Time to swap them I guess
Yeah
The chips weren't all connecting
The green thermal pad (included one) is too small because the original ssd has smaller chips
(It's only 500GB so it makes sense)
dude
It was making the SSD enclosure (when I put both sides) bend a little bit
finish this
So it was putting pressure on the SSD I guess
i dont even know why you started with the other pad, this seems to fit quite well, okay in the zoom i see that it doesnt fit the whole surface
you could probably cut off something in the middle and put it there
but before this ends in a fire hazard or ESD damage
rather put it together like this
Well fuck
Even with the old ssd it's not booting
It just spins the fans and turns off
uhmm should I be putting thermal pads on my SSD?
ask them? 
everything feels warm here atm ๐
plug in the absolute minimum for boot
I just built a new computer too
My last one was from 2017 or something so I'm like whut
its nice when u can triple your compute power for under 800$ ๐
ahh i rather get new stuff more often than try "futureproof" my rig
Yeah my previous system was a Small Form Factor computer
After the first time upgrading a component, I was like fuck it and I'm not diving into that rat's next of cables anymore
ahh i have a huge case... been usin it for 3 builds now
I've got Fractal Meshify 2 Compact. and wow what a joy
lol i have a huge cpu cooler, but i didnt have a bracket for it.... the crappy cooler that came with it is not the right side around so its blocking 2 mem slots... i thought aww ill do that tomorrow lets see if it boots 1st
that was more than a year ago
I tried booting without ssd it didn't
I need to check whether the fan on my aircooler is correctly oriented and isn't pushing against the case air flow
try with 1 bar of memory.. if no work other bar in other slot
I didn't touch the ram and I would rather not touch it
ahh k
I'm gonna see a repair shop tomorrow and possibly send it to HP
you just plugged in an extra hd?
This isn't the first time I change parts in a laptop idk what and even how I screwed up
No I replaced the main one
Oh you're working in a laptop
ahh fuck laptops.. i dont touch those anymore
But even by putting it back it still didn't boot
It was soooooo painful to open btw
I might have broken it while opening it
all components glued together... 6 diffrent kind of screws i dont have the tools for...
Honestly it's only one philips head screw for this but the clips
There are like 16 clips
Ooof
Only thing I touched is battery and nvme ssd
The battery connector is an absolute pain too
It's so tight and so small at the same time
Is that the wide connector by the RAM?
O_O
Battery is at the bottom
You mean between the ssd and the fan? @celest musk
Looks like it's the fan connectors
I looked at it it didn't seem like anything moved there
I closed it back I'll take it to a repair shop tomorrow and ask them if they can figure what's wrong with it
I hate laptops so much
Ithink I might have broken the screen while trying to get the back plate off
from all the pressure
it shouldnt shut off then
in the meantime Samsung Dex is really not that good
it doesn't shut off
my screen keeps flickering urgh
basically when I turn it on the fans spin a bit then it just stays black
which would correlate perfectly to a broken screen and it opening some kind of repair utility or the bios
(even if I spam esc which is what opens the boot options it just stays black even though it turns on)
it should have a FN key combo to toggle between external and internal screen
you could try that one when its on
there's also some very slight buzzing but idk if it's always been there
@celest musk that's a software toggle not a hardware one
it won't do anything unless I get to windows
it should work outside of bios, too
at least it used to be like that on the laptops i worked with (which however are >10 years old by now...)
nah it's an os level thing
plus my external screen is set as my main screen on windows but I assume it's not turning on from how many times I turned it off and on
sorry Ican't edit my messages because Discord sucks on Dex
so i guess you tried with and without external screen connected?
yup
there's a repair shop that opens tomorrow at 10 not too far from my house
I'll just have to not hate myself too much in the meantime
im late but rip https://youtu.be/kQLcOoqmx58
IS this really the end of hell let loose
Podcast - https://www.youtube.com/channel/UCwth...
Gaming Channel - https://www.youtube.com/c/ResonantUpr...
Shorts Channel - https://www.youtube.com/channel/UCedq...
======================================================
Business Enquiries- fps@resonantvideo.co.uk
Twitter: https://twitter.com/Resonan...
shame Black Matter could not compete in the big boy arena
โ(--)โโ(-- )โ
โฐ( ^o^)โฎโฐ( ^o^)โฎ
โฐ( โนoโน)โฎ
I Thought The Future Would Be Cooler โ OUT NOW!
๐งiTunes: http://smarturl.it/YACHTfuture ๐Special Edition Vinyl: http://ittfwb.cool/ITTFWBCLP ๐ฟCompact Disc: http://ittfwb.cool/ITTFWBCCD
โข โข โข โข โข โข
Lyrics
โข โข โข โข โข โข
Crowdsourced cults, all lit up on LED: next thing you know, youโre sipping on a battery.
Infinitely scroll through a SWAT tea...
Provided to YouTube by MGM
My Friend Robot ยท Regurgitator ยท Ben Ely
Mish Mash
โ 2004 Valve Records
Released on: 2008-01-01
Auto-generated by YouTube.
I'm safe I think
Have you seen the movie Orca?
Also are the Nanite viewport modes still broken in 5.2 hotfix
Gibraltar is free now? wow their economy took a downturn...
its all obvious, the orcas like to eat rich people, our coast guards keep feeding them with starving immigrants and now they discovered that billionaires are juicy and taste like love, and it all points to a certain hot dog lover from russia, just look at the shapes, the sub, which is just a hot dog without sausage, which looks basicially like a banana, which oh who would have thought, look like dolphins... can that all be coincidence? or could it be that the dolphins already started their insurrection? and infiltrated us? and guide our thoughts, ideas and desires? like wouldnt you like to eat a bratwurst right now? see... see... dont say i didnt warn you
Is it me or unreal engine subreddit is bugged? I haven't seen new post since yesterday
Does anybody knows or wonder why there is a "Shuffle" but not "Sort" options in an array? XD
This little dude can Randmly set the array everytime its called, but I can't "Sort" the list? why? XD
Sure, I have 4 item types, "Consumables", "Ammunition", "Items" and "Tools"
I'd like to set the Tools first, then the Consumables and Ammunition and finally Items at the bottom of the list. ๐ค
If we had an alphabetical sorter, I could set the Type to A. B. and C. making them sort automatically, but there's no node that does that, or is it? ๐ค
but the engine wouldnt know thats what you want. you do so you could make that youself.
and something that takes a comparator function is a waste of time, as its not much more effort to just implement the rest of the sort
Select allows you to select items and sort them or at least filter them i guess... I don't know ๐
I guess I'm ranting lol
the plugin that extends bp gives an array sorter but it needs to be provided a comparator function
whats the name of that plugin? is it free? ๐ณ
yes
i hope it does, there are pre built sort nodes, but theyre probably not what you're looking for as what you want isnt a typical sort.
so setting up a comparator function should be fine
Alphabetical Sort order sounds typical to me ๐ค
Items are kind of Sorted when you set up an Enum if you think about it too, Items in an enum can be set on top or bellow on a priority list when you are setting it up (look at the arrows on the right):
Welp, I'll be damn, Still don't know how to sort it ๐คฃ
My array is a custom "Struct" filled with ID and Quanitity that connects to a DataTable using another Struct that keeps the items information... that table is the one that holds the Enum I mention above~
So far, I've read that you need to Loop around the items comparing them and Swapping them until no Swap is needed and the List is sorted~
I'm pretty sure there should be a more efficient way to do that ๐ค
Anyone has done this type of sorting before? ๐
Oh, thanks ๐
Since enums are technically integers you may be able to implement your own faster sorts like quick sort.
woah keep it down guys! All this vibrant interesting conversation is distracting!
Here have a screenie of my wonderful alien flower model
I really feel like modelling every bit of foliage by hand for my game will push the release date back 10 years
You could just use megascans foliage. Release sooner with horrible fps?
meanwhile my issue:
that kind of issue on 20+ BPs
Funny you say that, I had a chat to acouple of the Quixel guys at Unrealfest
I think I could use some of the megascans stuff with some colouration, use other bits for kitbashing and/or mixed with procedural methods. Obviously modular foliage is a thing too just like buildings or other props
I just need foliage that doesnt tank my FPS
I think I want a nap
nevermind the nap I guess. thunderstorm rolllin thru
got windows open. Spose I could close them and go lay down again
I went from sunny Gold Coast to crappy windy thunder and rain down here near Adelaide ๐ฆ
yeah this bit of rain and thunder developed pretty much right overhead. Was clear sky 20min ago
not enough lighting to bother staying up. ๐ค
40L/m2 yesterday ๐ฌ
that sounds like a lot
hmm watching this Luminosity events thing on twitch and apparently Netherlands has beaches
not quite as nice as Surfers Paradise tho ๐
I just generated some new Nali Fruit ๐
they arent super bad... but may also depend on where you go
you had me at nali
anyone know of any good crafting system tutorials? Like a crafting bench type thing, with a recipe list, shows what you need, select how many...
Mine 'worked' but it got broken by my inventory system change, and it was a mess, so would kinda like to rebuild it properly
I wonder whether you know exactly what kind of system you need. Also, this sounds like you want a crafting & inventory system.
I've got the inventory system, it works good. Just broke everything when I deleted the old inventory systems. But my crafting system is messy. Its possible the ideas are there but the implementation is shoddy
If you don't want to design it i.e. use someone else's idea... Have you searched on the net? ๐ค I frankly, don't remember such kind of tutz.
Inventory is a common thing. Crafting not so much. Tho there are some plugins on the MP.
Did find one vid that kinda looks like what I want, watching to see if he shows the bits I need
hm he kinda glosses over the parts I'm struggling with, and his BPs are all over the place
maybe its just the my UI suuuucks and is making it messy
suuuucks
Pistol ammo isnt for pistols
enable craft button then call it done
well the game is based more on my time at portia, which is more crafting than farming
there was a game called Ganja Farmer from Evil-X Systems where you had to protect your weed grow from the FBI. Fun times.
I dont always grow crops but when I do I use a mining gun
and then shoot them with the pistol
dont shoot my Nali fruit bro
just the roots?
did you play ooblets? Epic Store exclusive, ton of $$$ for that ๐
never heard of it
I got all excited thinking your game was about time portals
I'm not good enough of a game dev to make a with time travel
or time
or travel of any kind
.... youtube is watching this discord. This is what came up next in my selections : https://www.youtube.com/watch?v=XlnTsQ6_03M
I wanted to be able to send a link to just channels 1 thru 8 to friends, so I made one. LOL And the album title... is there a missing apostrophe? Or is he trying to say that time travelers dream? Oh shut up, inner grammar-nazi!
you should prolly do ur craft logic inside the inventory logic
well not really but its more easy ๐
but crafting pistol ammo should be really easy.. as easy as ammo++
One for laura...
I just got the most comfy chair cushion for sciatica and circulation.
its like farting into a cloud
I tried that once. I mist.
how do you mean?
well yeah, the inventory handles Adding/removing items, checking quantities. The crafting UI handles the bulk of it, displaying recipes, if the player has enough materials, clicking craft.
then on machines where you feed it a material and have to wait X amount of time, it has a timer to make the item instead of instantly crafting
my implementation of it was just very messy, and probably more convoluted then it needed to be
Didnt like my UI either, so redesigning that too
yeah this is probably my first full redo. possibly second...
oh I know that. cause thats exactly what I keep doing ๐ฆ
I've still got the old code to refer to, but its so messy.
Probably spent more time chatting about it than actually doing work too
yeah, cept I went for a sleep, and was unsuccessful at that too ๐
they were jackhammering some concrete on the site next door, was a little loud
it seems data assets and data tables dont play well together ๐ฆ
atleast, cant seem to make a data table reference a data asset without it being a soft reference, which kinda complicates things
I got a tool which makes tables of data assets
I didnt want to have an entire table locked for single entry editing
lol, I just changed how my crafting system works. I think. if it compiles.
if it works, I get to redo this evenings work ๐
but also get rid of the recipe data table
Goddamnit. It looks like a function I need isnt available in BP
yeah, thats probably what I'm going to do
hrm, I have to include a header of a plugin. Is that possible?
Thats what module dependencies are for
yeah found a post about it. am reading, I think I get the gist of it, still comprehending...
same way you add an engine module dependency to your modules
never done that before either.
oh you definitely have
oh wtf, its compiling
It looks like Joe Graf has retired from Epic ๐ฎ
its compiling, but it'll error out when I get to my new library. I think I declared the function, but didnt define.
I can retire w/o being in Epic too.
I'll never retire from being epic ๐
rally things can happen after rally https://www.wrc.com/en/news/2023/wrc/neuville-disqualified-from-safari-rally-kenya/
was he speeding?
I was banned for poor FPS
he seems used unauthorized who drive to stages
did you have a stroke while writing that reply? or did I when I read it?
I had a stroke of genius
I had a stroke too, but its NSFW so I cant talk about it
you can read the thing https://twitter.com/eWRCresults/status/1673073119919996929
no I cant :p
I'm trying to think of a certain VR game where you can detach your hand and control it through a space
I can't remember what it was called
Oh
Another Fisherman's Tale
you should add 'fx' in twitter URLs for videos...
Chasing zebras at #SafariRallyKenya!
#WRC #seanknows
i can not believe they do WRC in safaris ๐ญ
imagine killing a baby ๐ or a baby ๐ฆ
i wonder if the cars brake distance is lower than the one of a zebra
sure if one jumps in front of a car it's rip, maybe even for the drivers
maybe not for the drivers...
they have tough frames
yea but if something punches through the glass it might break their neck
that does not happen

i was happy my username wasn't taken yet
Blender?
Go gradual. Start from 1D modelling.
then pixel-art
-1D go back to monke
then vector-art
and since 3d is vectors, you are already there ๐คฉ
yeah but still... 3d uses vectors
so, 1 dimension here and there does not make much difference
at least that is what i think ๐ฅบ
okay noted refuse 3d go back to monke
i did install blender a few months ago i've just been too much of a wuss to learn it 
if you are doing art for games, consider having the normals shown
xD
last one -> Normals
that's quite the suggestion for someone who barely opened blender
I prefer to show the wierds.
the silly goofies
unless you have normal maps on your mesh
although there is Shift + N (recalculate normals)... some-times you just need some human input on those
yea, i do pretty much only inside out checks
the only 3d experience i have was sculpting a hand and having it 3d printed for a school project
but that was on an app not blender
you can also skip the donuts videos by Shift + A -> M -> T and call it a day
and if you are wild, adjust your Blender to start without the default Cube
but there are controversies
start it with monkey
Self-explanatory.
Part2: https://youtu.be/StqgUS2Zw30
Song used: https://youtu.be/8C-CokwJ-34
P.S. - I do in fact do personal tutoring sessions (paid tho) So If yall need help with a project or workflow:
Discord: Oby1[Andre']#9774
Email: [on the about section of my channel]
Discord server:
https://discord.gg/SqfCKES
come on, let me finish the donut tutorial
Alt + Left click on center edges
S
you have a donut
Alt + Left click
Right Click -> subdivide
Alt + Left Click
G - Z
a better donut *-*
Left Click -> X
Shift + Alt + Z for showcase on #1054845177509974107
next tutorial is how to set a palette on Gimp and bring it to Blender
i skipped the donut tutorial every time i downloaded blender (which has only been 2 times but still)
i never did one
i started by reading the docs. and some basic usage on Youtube
my art is really simple... i touched the sculpting tools once
my art is ,,, yeah
anybody successfully use Dream Textures?
Sounds like an AI product.
yeah, it is just blender localized stable diffusion
"just" .. it is super cool, but it is not really working the way it's advertised (loose term since it is free)
i tried to get it running but failed
cant recall why though, i think it didnt work on linux or smth
i think it does now. biggest problem i am finding is lack of detailed docs and like 0 response in the discord.
does it still require to use special models with depth informations or is that optional?
I am trying to figure that out right now.. it uses ControlNet now, with a Node type setup
i honestly don't know WTH it is doing :/ and 'They ain't talkin'
this whole Node thing bugs me. Before, 2 seconds to fill in a form, now all this time placing nodes just to end up filling in a form :/ but with nodes!
does someone know of a font with all the keyboard keys as icon, and ideally also smth for mouse buttons/wheel?
can be paid if priced reasonable, and should have a license which allows commercial use
No, but what if you just type the character you want to use. WSAD or whatever and use a blank keyboard key as a background image?
looks shitty considering the alternatives ๐
the point is that it can project on 3D shapes
which bing probably cant
WHat version?? Source image is gone from mine. Also, i only have Depth and Depth and Color option. Please show all the settings in that panel
what models did you DL?
No Source image slot
that sounds like the old .9 version
that was the only one i could get to work. they are at 2.0 now
can you show me the top, where mine says Stable Diffusion
๐
Do you recall if you did it in Image Editor, or the 3d view?
Finally!
i used a picture of a forest as source, and 'elf ina forest' as prompt, with the Pixar Model
That was the key. I was stuck trying to project on to 3d. did Not work for what i was trying to do
Thanks
"Ain't nobody got time for that!" ๐
i had, had it working once before, a few versions back, and thought my memory would carry me through. that was a mistake :/
That feeling when you compile and test your blueprint after spending over an hour on it and it works flawlessly the first time.
I am actually just trying to make some stylized textures, in the end
i tell ya, the 3D viewport did not like me at all :/
new computers are always nice ๐
no kidding!
Hey! Nice start ๐
Cool deal! i am literally about to fall over, so i am done for the day. I will give that a shot when i am back.
Yea, makes sense. My goal is to make textures, so i still have hope ๐
thanks for proving it works ๐
Anime called too cute crisis
Upon first seeing Earth from the Azatos Empire's survey ship, Chief Investigator Liza Luna plans to eradicate every lifeform on it immediately, leaving behind only useful resources. While surveying the planet, Liza discovers that human civilization has evolved at a pathetic rate compared to other lifeforms. Liza makes her way to the surface of t...
And with that I am off to sleep!
Am I seeing ghosts 
A house cat is close enough to a demon for most non-occult purposes.
More portable for those out of town summonings
Today I felt generous and donated some money to AdBlock.
I mean, have been using it for several years, devs can go buy a donut at least.
uuuugh my reality scan is taking ages to process
came up alright, just got way too much of the ground in there lol
I think I'll try to suspend them too so I can get under them abit better
Ain't bad, needs cleanup ofc.
I tried something smaller to start with and it just failed
is this a statuette you have?
Yup
are you a cow collector?
I ate too big of a cookie and now I feel sick
y cookie so big
Im a cookie collector
Sooo slow lol
I literally started learning this layout on the 7th of this month
ask dieter in 20 years and he still gonna remember this date
and his eyes will spark
oh yeah that cheap looking one
I find that hard to believe, you didn't post a pic of it today
which switches do you have?
Red switches
My prev kbd was with linears, cherry red. Switched to brown cherries. Much better.
I'm not playing competetive shooters.
Not at all. It is not linear. Is not loud like the blues.
After the reds, I bought a demo kit of all their switches. Best thing to use before buying.
those are just the "default" opions
^
all who's switches?
Cherries.
They have a good range and good switches.
I like linear for typing, I never liked clickys
Ofc, there are more, but at some point you gotta draw a line of the effort needed to buy a kbd.
Have Gazzew Boba U4T atm, pretty nice although quite heavy spring
had Feker holy pandas before, also quite nice for the price
Reds have been to quick to actuate. Even resting my finger was accidentally triggering them. Some of the others would have been better.
Roccat also have very shallow depth so I can type super fast on linear without the added friction from clicks and bumps
I want to get the heaviest clickies to make it 100% enjoyable for stuff like 3d modeling (pressing commands here and there)
if I were linear gang would probably pich gateron yellows as budget option
I'd like to try the gateron ink blacks as well, heard good things about them
if you wanna go super low profile you can get choc switches instead of mx
needs different pcb connection though, so can't put it on everything
way less common
like this
very flat
oof
Are you wasting the internets again lol
Saving ppl from scam links.
Just trying to feed my prawns
I tried roccats membranical but it just didnt feel right. Theyve got optical* titan switches now on the vulcan 122. So confusing buying a keyboard from them though cuz you can get which switches you want so you gotta check the listing since theyre all the same model
ah, the things to keep us busy while society collapses around the world
but akshually, there's never been a better time to live, medicine, quality of life, facilities, everything is at the all-time high
we live now better than kings centuries ago
at least kings from centuries ago tried to stop the enemies at the gates
the only enemies i have are those who by action or creed have declared me their enemy
like extra weight
Any time. And welcome back!
Lured back by a red panda. Of course!
Red pandas are pretty cute. I'd let one lure me back.
They are.
groundhogs is where it's at https://www.youtube.com/shorts/afICAyvX0Z4
Don't touch me, groundhog,groundhog day,groundhog indonesia,groundhog teriak,groundhog pet,groundhog meme,groundhog day trailer,groundhog the ants,groundhogs,groundhog day em beihold,Cute groundhog,babi tanah,babi tanah lucu,hewan lucu,cute animals,Binatang lucu
omfg, that sound - why this can't be muted
IDK, but you can mute the whole browser through the volume mixer on windows
I talk about the discord built-in player.
Yep, and IDK_why they do not let us mute it, so my work around is having Firefox Dev version installed for the sole purpose of using discord, so i can mute the entire browser, and still have music playing in Waterfox
librewolf for casual browsing until i find a site i trust, like the UE Education site, then it gets bookmarked in Firefox (regular, not dev). Edge for all the streaming services, since it does 1080 the best, due to the usual 'behind closed doors' deals MS does
then if for some strange reason i want to let someone use my computer to mine bitcoin for themselves, i would install Brave ๐
i have.. it sounds like a good idea.. ๐
Why the heck do you have a greenie next to your name? did you have to make a new account when you came back?
the server join date resets if you leave a server
so when you rejoin, you're considered new
I can make money w/o writing code. Ask my employer.
I make money without code too, but not very much money
Thanks for the info
Freaky tiki, man
y he naked?
i can understand on the beach... but in the rain in the jungle?
whats the backstory on that?
typical. if that was a woman character running around half nekkid, you wouldnt question it
thats last pic looks like verry chippy and sharp rocks on the ground.. i hope he is wearing boots
yea i dont think i like that last pic... there is soo much clutter and looks unnatural
its all tiny red rocks.. but under it has diffrent color
he has a linetrace sticking out of him
where does the trace start?
I like how its just 1 trace... thats more performant than 200 traces
that wil save optimizing in a later stage
Why not megascans? It looks like simple tileable textures
But what does your art director say? ๐
Then you need some gigantic mushrooms
why are they not bright purple though
Star Citizen is pay to not play?
This panda looks absolutely bewildered. Poor thing.
Star Citizen is kind of controversial
someting about supporters just tossed money into the empty void of space
Star Citizen changed from cryengine to lumberyard i believe... did they stick with that as final engine?
its like the biggest game ever not released on lumberyard i believe
also didnt lumberyard change to some opensource public domain stuff? ๐
mayB they need to fork that
I installed lumberyard once.. it was something
crysis 2 wasmultiplayer
i think the 100 player thing has more to do with dedicated servers bein the norm
and servers bein faster overall
yea but games are build for rented top line servers now, not player hosted
ahh must be new, never heared of it
UE5 stuff
well fortnite does use it so it's not that high risk imho
doesnt say fortnite uses it tho
The system builds on Epic's experience with Fortnite Battle Royale,
so it prolly does..
or looking at using it
dunno how it ties in with GAS cuz that has replication and IS used for FN
Current game code should work with minimal changes.... so might aswell have a way to flip it on and off from the start
its a lot of pre programmed stuff
prolly worth a look, can also just steal some fuctions from it
For most MP, GAS and CMC is the way to go.
ewww CMC
what is CMC?
ChonkyMovementComponent
It's not great for performance, but with most games that doesn't matter.
If you have a lot of characters, sure, use something else.
GMC has a lot of improvements over the CMC too.
It just aint free ๐
general movement component
its great, it also supports box colliders for characters
and source style movement
with broken diagonal velocity?
yep
๐
man got new wheels on my office chair, such nice rolling
also makes me sit a little higher, very nice
personally I always found it annoyingly floaty
accelerated bhopping and surfing mainly
very nostaligic and can be great for more fast paced shooters
Broken diagonal velocity? I.e. forward+left = move faster?
or just normalizing
My memories of morrowind are jumping. Just jumping. Everywhere.
Ah.
Diagonally jumping?!
๐
How the fuck.
That's some halo buggy jumping skills right there.
"How to get absolutely no enjoyment from a game, in record time"
Lol
I'm sure they enjoyed themselves immensely
probably
Now some men like the fishin' and some men like the fowlin'
And some men like ta hear, ta hear the cannon ball a roarin'
And some men like the challenge of clearing a game in record time.
lol ๐
"and some men, you just can't reach, so ya get what we had here last week. which is the way he wants it. well, he gets it!"
And he got it. A war on time like no other!
๐ถ

https://www.youtube.com/watch?v=-ucDiz3GYrg GnR Civil War Vevo
anyone have experience with Smooth Sync? Does that just create the same usual cheating possibilities?
Brings back the memories.
indeed
don't forget to say goodnight to the crypto ai bros
I like flowers.
Turtles are cool.
I wonder if actual turtles like pizza.
I like trains
tldr: no, it contains dairy which they can't digest.
some turtles breathe through their ass
Imagine breathing shit whole life.
A lot of people talk out of their arse, breathing through it isn't much of a stretch.
lmao
AI assistant in the new EAP 
sus
Comes with free compliments of how cool are you.
now the russians are stealing your code

I'm fearing the quality of upcoming software.
well AI refactoring tools are a really good thing
AI writing code is a terrible idea
It's good if you already know what you're doing'
AI refactoring good? Hmm....
this is gonna ruin juniors though
I would be surprised if it is offline. Tho it could be a pretty small model....
Imagine writting code and your GPU being on 99%
These days, nonAI earns respect.
I suppose, but will be #cpp satisfied with such mediocre model? BrainJet prolly use something more fancy. On nvidia gpus.
At least I would have advertised as such. Ride the wave.
Larger models with LLMs is not always the way to go
There are smart techniques to getting much larger context lengths with smaller models
And 7-12B models running at fp16 (about 14-24GB of memory) outperforming GPT3.5
GPT3 and 4 are so huge that most of their weights are not fully trained so it's wasted potential and why just a 7B model can outperform it
So, GPU on 200%
I mean, they may have explained what is that AI actually.
it's GPT4 I'm 99% sure
But it's actually so much better than standard GPT4, it must be a custom finetuned version or something
๐
@fathom wadi is there a way to stop sharex from saving screenshots to disk? I only want them in my clipboard.
yeah deselect it
https://www.shutterstock.com/video/clip-2132120-opening-ancient-scrolls-alpha-channel-hq-animation
Does anyone know where I could get something like this but free and without a watermark? Just had a sick idea for my UI
That discord outage was massive...wtf happened?? lounge style answers only
I left and rejonied thinking I'd fucked up ;p
I read that as "There was a beaf sausage".. :d
Strange how this only affected 3 of the servers I'm in... Or maybe it affected more and I did not notice.
Of the 3 I noticed, only one is still down
:question: are you taking over the discord servers?
:8ball: It is decidedly so.
'least it wasnt as bad as that time where messages were repeating lol
jk
they had to restart the server for a windows update
I actually accidentally unplugged the power cable of a machine in a data centre once.
It seemed to have 2 plugged in to it, though, so I quickly plugged the other one back in and walked away.
I dunno. It was the only server I ever saw there with one.
Thsi was back in the 2000s.
I used to go to Telehouse in London quite a lot.
well my knowledge is also from ~2010 only and a small company, but their servers had it all
except for those which dont store critical data
Actually my step-brother-in-law actually runs a company that has its own data centre. It's pretty neat.
Apparently.
i guess the majority of cloud servers runs without redundant power either
He is just a little bit loaded.
they just stay synced, if one unit goes down another can handle it without data loss
Worst oops I ever did was restore a live database with a test one because I thought I was on the test environment. Was only like that for a few mins before the customer called and was wondering where all the data went. Good thing we had daily backups.
I put my personal email in an error message that shouldn't have left an internal test
i think something similar happened to me, at least i remember spending a day typing of data from paper back into the system because there was a rollback for some reason ๐
But left before we ever actually rolled it out. It didn't work quite right and if there's a power outage, that error message pops up on what looks like an ATM placed around bars and a tech has to go out and fix it
I'm assuming they finally fixed it because that was like 10 years ago and I finally stopped getting emails like a year or two ago
Isn't that what github did or something?
Except they didn't have backups.
Some big company failed horrendously by typing a command into the wrong terminal.
Oh it might have been them.
If you're tasked with deleting a database, make sure you delete the right one.
Sources:
https://about.gitlab.com/blog/2017/02/10/postmortem-of-database-outage-of-january-31/
https://about.gitlab.com/blog/2017/02/01/gitlab-dot-com-database-incident/
Notes:
1:05 - The middle bullet point about the account that had 47,000 IPs was never mentioned ...
Cities Skylines 2 sounds really good
I'd look forward to it if I knew it wouldn't turn out like the first game. A city builder game where you need to buy $200 worth of dlc just to get half the stuff you'd build in a city
Like seriously. $15 dlc to design my own park?!
Yeah that is abit unfortunate but it does sound like they put that money to good use, the traffic system is 2 is worth a shot on its own
yeah the dlc for the first one got really out of hand
There's going to be car crashes, proper parking, road condition and public works etc
I wish Naughty dog would make another Jack and Dexter 
I played the crap out of those games as a kid
What you talkin about, youre still a kid ๐
My existential crisis would beg to differ 
By kid I mean like 5-7yo ๐
Also pc port for the new horizon zero dawn, you can't port the first one and then leave me hanging

In the second game Aloy becomes a chubby munchkin
All that winning makes it difficult on ab day
Lol
To me the first horizon has one of the best story plots ever
It's so well done
I love the art style, its pretty epic
Yeah
first time you see a long neck its full on
I think I recorded my first encounter with it ๐
I got the Lego set of the tallneck. An amazing build.
Definitely need to play the horizon games
I was so in awe when it came out, the fabrics are so well done and the light through the leaves at night. Pretty standard things nowdays but back then it was such amaze
I played it like a year ago and the graphics still hold up really well
Im super keen to see what happens with Decima going forward, Im assuming Guerrilla are going to be upgrading it for their next games and Kojima will still use it with Death Stranding 2
Theres rumours that Nicolas Cage will be in Death Stranding 2, that could be really cool if he's the antagonist
it'd be cooler if somehow the player ends up swapping faces with him
Probably better to ask this in an UE channel but as far as Im aware youre allowed to share the plugin with team members no worries and yes in the projects plugin folder, just make sure its compiled for the right engine version
iirc, code plugins has the be multiplied per seat. The art assets and etc can be shared ๐ค
In any case, the EULA can be read.
Hmm fair enough, good to know. Trying to think of a code plugin I actually paid for lol
UE doesn't have prediction and rollback?
Maybe it's because I'm new, but isn't that like a standard must have kinda thing?
For 100$ I can consult too, btw.
Plugin files can be shared, but licenses will need to be purchased for each user that will be using the plugin.
See, I was right.
1000$ plz
They can't afford the $1000, all of their money went to plugins ๐
dafuq? 800$ 20% discount
"Team! The plugin we need is in 'free this month'! Grab it or you're fired"
Is that some photoscammetry stuff?
It is all legit.
Legit expensif
I wonder how plugin usage is defined
if its just on but not called from anywhere is that used?
Is it called from my code or someone elses
Seems like a difficult thing to manage, Im not even sure how you buy seats on Epic MP
You have to register your company with Epic, and you can add/remove people and stuff
I looked at it but haven't used it
Well least they have some sort of system in place, Im a sole trader so all my personal and business is mixed
I was more thinking how you go about making a purchase, buying it individually for 10 users seems like a pain let alone 50-100 each needing Epic accounts
Id just avoid buying stuff tbh, saves management overheads
Yeah small groups its easier but I would hate to have a big business where every new employee is instructed to make an Epic account just to manage licenses. Its not like Epic have a way of validating who worked on what project and when precisely anyway
Im not suggesting you do the wrong thing btw, just that its alot of redtape for not much reason
I can imagine that sort of clause hurts freelancers pretty badly unless the company they work for shares a seat for a limited time. I think seats are transferable
Would be totally naff to link a license to someone individually and perpetually
Im not a lawyer though so dont take my word for it, I just know I what angles I might dispute if it came down to it
Just looking at business laws like ๐
Just looking at lawyer prices โ ๏ธ
What's a budget?
Dont forget lots of this EULA stuff favours the writer on purpose, its not all legally enforcable depending where you live. If Epic does manage to drag you back to NC then you might have issues lol
Thats why I say talk to a lawyer, they know your local stuff better than international lawyers would
"Hey chat gpt, I'm seeing a lawyer tomorrow and I would like to have a templet legal document to look at for [my specific purpose] can you write one for me for [my locality]"
too bad if theres been case law counter to your position since 2021 rip
You just need a good programmer lol
Still trying to find a plugin I bought, dont think I own any
wait, Instant Photo Camera... here we go, I know I paid for that one
They obviously add complexity in licensing though. I got nothing against plugins I just think the better thing to do is have the plugin itself free with support being the cost
I'm in a nice spot where if it's expensive, I probably don't need it. If it's free, I should probably learn how to do it myself, first
Ive helped on UE specific plugins which are free on github, just makes for a nicer interface to be able to use git modules and pull em directly so you get the updates direct. Thats if you arnt forking them though
Main issue with UE stuff is that most of the time you want to provide a sample project so you have a git module for your plugin in your project but most people just embed the plugin into the project for release
i dont feel slower in UMG than with webdev stuff
it had a learning curve, but overall it does it's job quite well imho
@zinc matrix made some UMG plugin that makes wortking with UMG so much better and faster.
I keep telling him to put it on the marketplace to make bank, but yea. he doesnt. <_<
Man just likes living in poverty
where can i get it for free until you convinced him?
hehe
you're all being held back by not using slate though
the thing with web tech is that it's usually damn slow with complex stuff
...then again so does UMG seem to be
Imagine more with Unity AI ๐ฎ Introducing:
โญ #UnityMuse, a platform of AI capabilities for content creation, with Muse Chat for AI-based search now in closed beta
โญ #UnitySentis for AI-powered experiences at Unity runtime, now in closed beta
Learn more: https://t.co/PThr4Ju0d4
1299
320
If we can add this to UE, we can delete this server.
people pointed out all it does is download crap from sketchfab
Mooons, you heard dat? Your little cow is a crap.
Saw mentioned they use their own DB, gathered from... something.
if you look at unreal, this really does look like a toddler made this
also keep in mind that this is an Ad
the examples are cherrypicked
epic might add similar things tho, ML Deformer is one step in the direction
i could see that they add something similar for animations, which take the body shape/rig into account
which then lets unity fade into irrelevancy again
yea, where one decade was CSS fixes for IE6 ๐
the one thing that a Web based solution would probably do better is element styling
i feel like this is the main clutter in UMG
๐
Free? ๐ฎ
the good thing with UnityAI is that we can send all the AI Crypto NFT scammers to their discord now ๐
You know its cool tech when its got the bouncy music
player position is centered? so that doesnt even need to be in the material
just overlay an image over the minimap material
oh
You cant use simple math in materials?
You would pass through the value as a parameter
You can use a lot of math in materials.
Math could be done in the widget
i would do the math in the material tho
To be fair, you could probably do the math in the material. The actor orientation might be available there
is probably faster than cpu ticks
To be fair UMG is not bad but it could be stronger in terms of features
And tbh I rather use UMG than web stuff
Mainly cuz I am just used to work with UMG in the last couple of year
web tech is the reason the launcher runs like ass
is it? i thought the launcher is just crap
I would say it is more like a low-effort job.
the epic launcher? its slow af... takes forever to launch or load a page
Not sure if that's because the epic servers or the launcher itself is a piece of shit.
like me and mates dont even open it if they got cool free games... its just such a hazzle
i dont see why something like tiny tina wouldnt be possible with UMG
sure you got to learn shit, but it's not impossible, and neither will it take much longer when used to UMG (maybe it's even faster implemented in UMG for some skilled dev)
Are Gearbox still using Scaleform?
but then, how are you going to solve inheritance for your web stuff? javascript? some custom template parser?
reusing existing code...
and building on top of existing layouts
ah it sounded like you are already working on it...
those both can write slate code, just sayin ๐
UMG is a wrapper for slate that makes it blueprint accessible
All the stuff you can do in UMG is based on slate stuff, so it's very similar. Just in code, rather than visuals.
but if you really just wonder what horse seeman is up to today...
If there is, it'll be called a combo box.
you can do stuff like "button appears if i hover here" but its def getting kinda bloaty at some point imo, gotta use alot of different slates...
but that appplis to blueprints too, cant sort the items in it properly so it becomes one huge pile of stuff
so what you do is you make blueprints that you put into blueprints, or slates into slates
the drop down menuwould simply be a smaller slate ontop the big background one
Normally the dropdown part goes into the hover layer where tooltips and the like are.
that was never 2 seconds
yeah...
like at least 1min
if you write code with +/- 52 seconds accuracy that might get wonky
(nevermind)
I noticed!
css+ hotml is quite nice to style stuff for dynmaic display sizes indeed, but you have that in umg too, kinda
but its unreal, you can prolly open a slate file and let your ai edit it for yu, or even faster, simply use old school copy paste ๐
ue has 3d to screenspace conversions in blueprints
That dropdown does nothing on click
How would you bind the delegate to game functionality or pass the payload through an interop layer?
Thats kinda the core of it, visuals are bleh
nice loose dependencies
an easy slow lookup versus an assignment
this gonna be hella fun to debug when someone renamed smth
Now if you said you had UE reflection in JS Id be all over it ๐
If you reflect the properties then it doesnt matter what the events called since its an onchanged for that data
some could use like anglesharp
i think you should learn UMG and materials
before even thinking of implementing your own solution
https://blog.elmah.io/parsing-websites-in-c-with-html-agility-pack-or-anglesharp/ if someone had somethig one way to do it
that dotnet have source generators too now make it perhaps easier to make files web files
Minecraft!?!
have you ever seen minecraft UI code?
or minecraft UI in general
it's mostly just textures overlayed, and some opengl stuff for tinting, etc.
there's no UI framework
texture painting in Blender I see ๐
thanks
ggmilfs near you
stahp
weeeeee
I could just wash this under a tap
Washing machine could be a better idea.
eastern europe represent
Any Norwegians here, btw? A friend recommended Gudbrandsdalen cheese, but I can't seem to find the nutritional facts about it!
wait, since when did nigey leave the server?
who's gonna make our coffee now?
maybe he quit unreal engine in favour of php/css ยฌ_ยฌ
It wasnt voluntary
oof
he was banned? ๐ฅฒ
Yeah he was (checked the log)
banned for Nigeying
poor soul. I was boutta say i cant even see anything he did ban worthy, but then remembered thats kinda the point and strike worthy messages get deleted :P
the sheep police got to him
banned for too many mentions of spider milk (rightfully so)
I'm not sure I want to know what spider milk is.
It wasn't for nothing
sus
yea
he was a very h*rny boy
show us the images as proof

oh dear
yeah thats rather justified
explains also why i couldnt find the messages in question ๐
why on earth would be post such stuff knowing he would get banned? On purpose you think?
Some flaunt the rules. Some simply don't care.
yeah I guess. Silly thing to do when you been hanging out here for years. I'd crap a donkey sized brick if I was banned tbh.


