#No signal while plugging my HDMI to my motherboard
1 messages · Page 1 of 1 (latest)
Not sure what your trying to do, as it you wanted to create a custom res with Nvidia control panel it would need to be plugged into the GPU and not the motherboard.
Some boards will disable the iGPU when you plug in a GPU, or perhaps your CPU doesn't have on board graphics.
Can you please clarify what your actually trying to do.
im trying to create a custom res thats right, and what i meant by gpu/motherboard i tried pluggin the hdmi in the mother board and gpu, and i get no signal
and it was working until today where i plugged it in and was not working
i cannot understand what are you trying to do too, but if you have the gpu, when u plug it on the mobo it will disable integrated graphics
Yeah I still don't understand either. Are you saying that you plug the monitor into either the GPU or the Motherboard and you get no single? Are you saying your plugging both in at the same time?
If you have a GPU you should be plugging it into ONLY the GPU.
sorry for my bad eng, i meant i tried pluging it once in the gpu and i still got no signal Then i tried plugging into the motherboard
not at the same time
Is this still happening?
yep
it was working perfectly fine but that one day when i unplugged it it stopped working
do you know how to fix it?
@heavy galleon
I would say follow this: https://github.com/Evernow/AutoDDU_CLI/wiki
Do it while connected to dGPU if possible, if not connect to dGPU after you're pulled out of safe mode and driver(s) are installed and restarted.
Once done this see if the issue occurs, please don't do anything like creating a dumb stretched res, just see if the issue occurs with the default config
i still get
no signal