Unravel tone advice

[keen grail]

Hello, I just started learning a specific solo but can't get the tone right at all! I've never really worked on tone but am using Amplitube 5. I'm trying to match this tone here https://www.youtube.com/watch?v=bArtiit3lAE&list=RDbArtiit3lAE&start_radio=1&t=102 and here's my current tone attempt. I'd be really happy about any advice or good resources!

[rotund fable]

yours just needs a little verb I think ... for the rest it's fine

[keen grail]

What do i do about the noise though

[rotund fable]

get a noise gate ... play less sloppy ... get humbuckers

[keen grail]

Fair

Thanks, I'll try it out!

[rotund fable]

if you're close to some form of electric equipment it can also cause noise .. unschielded or badly grounded electronics too

also lowering the overall gain will also help a little

are you running directly into an interface or an amp ?

[keen grail]

I'm running directly into an interface with my pc, laptop and other electronics around

My interface also isn't the best, idk how that'd show in a recording though

[rotund fable]

Bad input gain settings can also lead to bad noise/signal ratio

Which interface do you have @keen grail ?

[keen grail]

I‘m using a used Behringer U-Phoria UMC22

I got it for like 25 bucks

[rotund fable]

Yeah those are known to be noisy

[keen grail]

I played around with it a bit and settled with a bit less than half on the interface

[keen grail]

Might have to invest into a better one then :/

[rotund fable]

It's easily a better one compared to the 22

[keen grail]

What do you mean?

[rotund fable]

That the 22 is about as cheap and bad as you can get ... So it won't be hard finding anything better

[keen grail]

Ah i see, true

Thanks for the advice