#JW-Mesh Router
oblique escarp
Okay we need to verify that is setup correctly. So back on the computer do a ipconfig /all in command prompt and take a screen shot of the output that has the 192.168.0.33 address
slow canopy
Not seeing 0.33 anywhere now
Looked thru all of the output and not seeing that IP address now
oblique escarp
paste the entire output
Have you rebooted the computer since you made that reservation?
slow canopy
Maybe
Shoukd I reboot or copy output?
I remember it asking me to reboot router which I did do.
oblique escarp
You can reboot first if you want. A reservation like that won’t take effect until after a reboot
slow canopy
Ok here goes
My router software has another section called DHCP & NAT with more setting too BTW.
Ok, rebooted. How do I copy more than a screens worth of DOS output?
oblique escarp
You can press control+a and control+c and paste it with control+v into discord. It will probably ask you to upload it as a file
slow canopy
Dear god I have no idea what Discord is attempting to do
Sitting here forever looking at a file icon. Did it send?
oblique escarp
Yeah discord's file upload thing doesn't work super great
slow canopy
It's confusing.
oblique escarp
So I'm not sure what device you made your reservation on but it wasn't this one
The mac address of this computer is 88:D7:F6:97:9B:B7
slow canopy
I did it in the eero software on my phone
oblique escarp
You did a reservation on
slow canopy
it controls the router
oblique escarp
Yeah you just didn't assign an IP to this computer
slow canopy
maybe i reserved my phone...?
oblique escarp
maybe
slow canopy
so i just change the mac address and should be good to go,no?
oblique escarp
If you can type in those fields then put 88:D7:F6:97:9B:B7 in the mac address line
I would recommend making the reservation something on the same subnet as the router too
which is 192.168.0
You can just reserve the address the computer currently has which is 192.168.0.33
home routers get confused easily and having something on 192.168.7 might cause problems down the line
slow canopy
Change the DHCP & NAT setting back to "auto" or keep 192.168.0.0?
oblique escarp
Change the DHCP & NAT setting back to "auto" or keep 192.168.0.0?
Leave all that alone. On this screen #931560255081574481 message
I'd do IP address: 192.168.0.33 MAC 88:D7:F6:97:9B:B7
slow canopy
Yeah I made those changes too. I changed DHCP & NAT earlier this morning...not knowing what I was doing.
oblique escarp
Yeah I made those changes too. I changed DHCP & NAT earlier this morning...not ...
It's probably best left on auto. I'd have to see the screen shots to know what it's actually doing
slow canopy
oblique escarp
You can leave it like that. That just says you're using the 192.168.0.0 range
slow canopy
ok. I do have one more very strange issue which I need some help with. You're probably going to laugh about it too...let me get a screen capture...
A player was making a character and somehow managed to get this onto the scene. It now appears on every scene and I can't delete it or move it...
oblique escarp
That looks like something a module is doing. Disable all your modules and see if it goes away
oblique escarp
Is it a token? Click on it and then right click it. Does it open the little menu with the gear?
stray snow
slow canopy
089
oblique escarp
System as in "DND5E" "Pathfinder"
oblique escarp
It may be something that specific system is doing. You'd need to ask in #dnd-other and see if anyone else has seen it
slow canopy
ok. you guys rock and thanks again!