Trying to get old printer running on orca slicer

[crude basin]

I'm using a printrbot metal plus from probably a decade ago (got it donated to me), and am trying to run it on orca slicer. I have identified that somewhere within the first few lines of the g code that prevents the printer from proceeding.

Orca g code:
M486 S0
M486 A3dbenchy.stl_id_0_copy_0
M486 S-1
M106 S0
M106 P2 S0
M190 S55 ; set bed temperature and wait for it to be reached
M104 S220 ; set nozzle temperature

Working G code from diff slicer:
T0
M190 S60
M104 S215
M109 S215

what I am trying to find is a setting or something in orca slicer (if it exists) that allows me to remove the M486 commands which I believe are for object assignment. the M106 are for fan speed and should not hang the code as they are also in the working gcode a few lines later

[surreal cipher]

Check in the other tab in the process settings or edit machine settings, there may be something there.

It's little pencil + notepad next to the drown down to edit.

[crude basin]

Ok so it might just not be doable because there are no settings within the printer settings tab to adjust this part of the g code except for where it alllows you to disable set remaining print time

[surreal cipher]

Do you have the advanced switch on?