P2S printing issue | 3D Printing | Page 1

devout vigil Jan 30, 2026, 5:11 AM

#

Every print I have has been solid from this new printer, this is the second print of this item and it still has some issues with getting the lettering correct. What could I be doing wrong?

tawdry ironBOT Jan 30, 2026, 5:11 AM

#

devout vigil Every print I have has been solid from this new printer, this is the second prin...

#

AI Help

It sounds like you may be experiencing issues with your printer's slicing settings. Make sure your filament diameter, nozzle size, and layer height settings are all correctly configured in your slicing software. Additionally, check for any model defects that could be affecting the lettering during the printing process. Finally, ensure your printer's calibration and leveling are accurate to prevent any printing inaccuracies.

restive mulch Jan 30, 2026, 6:15 AM

#

devout vigil Every print I have has been solid from this new printer, this is the second prin...

Could you provide a better picture? You can click the image preview and grab a picture from that.

devout vigil Jan 30, 2026, 6:16 AM

#

restive mulch Could you provide a better picture? You can click the image preview and grab a p...

#

Here’s a photo of it close up

restive mulch Jan 30, 2026, 6:33 AM

#

devout vigil

I feel like your white filament could be very humid, have you dried it? If you have the AMS it has drying settings

devout vigil Jan 30, 2026, 6:34 AM

#

restive mulch I feel like your white filament could be very humid, have you dried it? If you h...

i have not

#

i just opened it tho is that possible?

restive mulch Jan 30, 2026, 6:34 AM

#

I can also not see a purge / prime tower, are you using AMS or manual swap?

devout vigil Jan 30, 2026, 6:34 AM

#

AMS

restive mulch Jan 30, 2026, 6:34 AM

#

I haven't done multi-color prints from the mobile app before, but if you have a PC throw it in there and it should generate a prime tower for you

devout vigil Jan 30, 2026, 6:35 AM

#

restive mulch I haven't done multi-color prints from the mobile app before, but if you have a ...

i have done it through pc

#

how do i do a prime toweR?

restive mulch Jan 30, 2026, 6:35 AM

#

Let me boot up bambu

devout vigil Jan 30, 2026, 6:35 AM

#

i appreciate you man

restive mulch Jan 30, 2026, 6:38 AM

#

tawdry ironBOT Jan 30, 2026, 6:40 AM

#

devout vigil i just opened it tho is that possible?

** Wet Filament**
Filaments can be “wet” from time to time and this includes some of the most popular filaments such as PLA, PETG, ABS, ASA and TPU. Because of the hygroscopic nature of these polymers, they absorb water from the air and become “wet”. This can manifest in your prints as blobs and signs of underextrusion, because small bubbles of water vapor get trapped in the plastic as you extrude.

Another common problem due to filament being wet is stringing and, when extremely wet, structurally compromised prints. PETG, Nylon and TPU are examples of extremely hygroscopic filaments (they absorb moisture really quickly), whereas the most common filaments like PLA and ABS are only mildly hygroscopic.

❗Keep in mind, even if your filament is fresh out of the packaging, manufacturers often use water baths to cool filament in the extrusion process so it might be wet from factory. ❗

crimson ridge Jan 30, 2026, 6:40 AM

#

New filament is to be assumed wet until proven otherwise

devout vigil Jan 30, 2026, 6:40 AM

#

crimson ridge New filament is to be assumed wet until proven otherwise

really?

restive mulch Jan 30, 2026, 6:40 AM

#

^ I would recommend trying to dry it and keeping the prime tower on, idk why it's turned off in the file.

devout vigil Jan 30, 2026, 6:40 AM

#

i honestly didn''t know that

crimson ridge Jan 30, 2026, 6:40 AM

#

Yes

devout vigil Jan 30, 2026, 6:41 AM

#

i was told that the moisture from the packaging and shit is just fine

restive mulch Jan 30, 2026, 6:41 AM

#

If you keep your AMS closed the humidity gauge will probably jump quite a bit.

crimson ridge Jan 30, 2026, 6:41 AM

#

Sometimes yeah but mostly no

devout vigil Jan 30, 2026, 6:41 AM

#

im sorry

#

this is realllllly new to me

#

i had a ender 3

#

and went to this hahahhaa

restive mulch Jan 30, 2026, 6:42 AM

#

Same lmao

devout vigil Jan 30, 2026, 6:42 AM

#

p2s is crazy good tho

#

i have never had a printer that just worked

#

LOL

#

twins

#

im gonna try to dry it even tho i have nevr done it b4

crimson ridge Jan 30, 2026, 6:42 AM

#

Keep in mind that the humidity sensor senses the air and not the filament itself.

devout vigil Jan 30, 2026, 6:42 AM

#

crimson ridge Keep in mind that the humidity sensor senses the air and not the filament itself...

thannk you

#

do i have toi remove all filaments from the ams spout thingy

crimson ridge Jan 30, 2026, 6:43 AM

#

So you can put a sopping wet roll of filament in your ams/drybox with silica gel desiccant and it would read just fine

restive mulch Jan 30, 2026, 6:43 AM

#

Curious, did the AI not stop the print before it finished?

devout vigil Jan 30, 2026, 6:43 AM

#

restive mulch Curious, did the AI not stop the print before it finished?

no

crimson ridge Jan 30, 2026, 6:43 AM

#

"ai"

devout vigil Jan 30, 2026, 6:43 AM

#

and its happened 2 times

#

without stop

#

yeah "ai" lol

restive mulch Jan 30, 2026, 6:43 AM

#

Almost Intelligent.

devout vigil Jan 30, 2026, 6:43 AM

#

i feel like i have had mixed results with the detection stuff

#

LMFAO

restive mulch Jan 30, 2026, 6:44 AM

#

Maybe try upping the sensitivity, mine stopped the print when i had stringing.

devout vigil Jan 30, 2026, 6:44 AM

#

restive mulch Maybe try upping the sensitivity, mine stopped the print when i had stringing.

hm?'

restive mulch Jan 30, 2026, 6:45 AM

#

There is a sensitivity setting on how aggressive it is with the detection. I set mine to high, and it has stopped when i had stringing

devout vigil Jan 30, 2026, 6:45 AM

#

ohhh i didn't know that

#

thank you

#P2S printing issue