#Why is this happening?

1 messages · Page 1 of 1 (latest)

lost veldt
#

Hi, i an trying to use my 0.2 mm nozzle for printing miniatures, but this is happening, qhat could make this problem?

IMG_4456.jpg
analog caveBOT
#
AI Help

It looks like you're experiencing some issues with your print quality. Common problems when using a 0.2mm nozzle for miniatures could include insufficient cooling, improper nozzle height or temperature, or underextrusion due to a clogged nozzle or insufficient filament flow rate. I recommend checking these factors and adjusting them accordingly to see if it improves your print quality.

WARNING: This response is AI generated and may contain errors.
lost veldt
#

My settings

#

It is printed in am bambu p1s with bambu basic pla

analog caveBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

forest talon
#

Looks like you printed this without supports and the fan blows the pla away that doesn't stick to anything?