Sunlu PLA issues with the Qidi Q1 Pro | 3D Printing | Page 1

terse craneBOT Dec 25, 2025, 12:59 AM

#

AI Help

It sounds like you may be experiencing issues with either the filament not feeding properly, the print bed not being level, or the print settings not being optimized. Here are some troubleshooting steps you can try:

Make sure your filament is loaded correctly and feeding smoothly. Check for any clogs in the nozzle and ensure the filament is not tangled.
Double-check that your print bed is leveled properly. A skewed bed can cause adhesion issues and lead to failed prints.
Optimize your print settings, such as print temperature, print speed, and layer height. Making sure these settings are suitable for your filament and printer can improve print quality and reduce failures.
Consider upgrading any worn-out or low-quality parts on your printer that may be causing issues.

If you continue to experience problems, feel free to provide more details so I can assist you further.

night quiver Dec 25, 2025, 1:14 AM

#

Have you got pictures of the failure mate

terse craneBOT Dec 25, 2025, 3:17 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

solar wraith Dec 25, 2025, 3:59 AM

#

night quiver Have you got pictures of the failure mate

Im sorry, it just stops printing out of nowhere, if not that it starts hitting the print. The print looks nice altogether

#

I do not have pictures of the print because it just stops printing mid way

solar wraith Dec 25, 2025, 5:43 AM

#

Ok, so its 7AM for me currently, I havent slept yet but i figured it out, it was the flow ratio being too high and I tried compensating it with temp/speed/retractions

#

Only thing that its left to do is to straighten the print base, not sure how it is printing so nicely with it being this offset

#Sunlu PLA issues with the Qidi Q1 Pro