Weird print messups | 3D Printing | Page 1

small gazelle Nov 21, 2025, 3:17 AM

#

Hi guys!!!

I’ve been 3-D printing for a long time now, but I can’t seem to figure out why these things are happening. All the time when I print there’s a big mess ups like this, and they result to a poor quality in the end of the print or a complete fail. Can someone help!!!

tired sealBOT Nov 21, 2025, 3:17 AM

#

small gazelle Hi guys!!! I’ve been 3-D printing for a long time now, but I can’t seem to figu...

#

AI Help

Hello! It sounds like you may be experiencing some common issues with 3D printing. Some potential causes for poor print quality or failed prints include problems with bed leveling, incorrect temperature settings, unreliable filament, poor slicer settings, or clogged nozzles. I would recommend checking these factors and adjusting as needed to see if it improves your prints. If you can provide more specific details or photos of the issues you are facing, I can offer more tailored advice to help you troubleshoot.

dusty flax Nov 21, 2025, 3:18 AM

#

small gazelle Hi guys!!! I’ve been 3-D printing for a long time now, but I can’t seem to figu...

oops its always zoffset, gaps in lines on the first layer are bad (also turn first layer support density to 100%)

tired sealBOT Nov 21, 2025, 3:18 AM

#

small gazelle Nov 21, 2025, 3:19 AM

#

Noooooo!!!!!!! Agh okay I thought I’d defeated that monster long ago

#

I will tinker and see

#Weird print messups