#E3Pro undrextruding tower sections

1 messages · Page 1 of 1 (latest)

violet spire
#

Seeming to underextrude on any model with towers, including benchy just before the arches. PLA at 205C 50mm/s, 0.2mm layer. Extruder steps and Z offset just calibrated. Using the Cura standard profile. Do I need a minimum layer time? Fan is 100% except for first layer.

image.png image.png
south vergeBOT
#
AI Help

It sounds like you may be experiencing issues with retraction settings, or possibly a clog in your hotend. I would recommend checking your retraction settings to make sure they are optimized for your specific printer and filament. Additionally, try performing a cold pull to clear out any potential clogs in your hotend. If the issue persists, it could also be related to cooling or part cooling settings. Make sure your part cooling fan is working correctly and adjust cooling settings as needed.

WARNING: This response is AI generated and may contain errors.