0.2 nozzle prints failed

[raven dew]

Hi, Im trying to print Tarot cards, with a lot of details and multicolor (black and white)
When I print a card individualy I have great results
But when I print more than one at a time it always fails
I have a bambulab x1 C
Im using the 0.10 high quality profile
the only thing I change is the wall generator to Arachne
And Im printin in PLA

I tried slowing down the printer but still fails

Any suggestion?? any calibration I should do?

[tepid path]

AI Help

When printing multiple objects at once, you may encounter issues with oozing, cooling, or bed leveling inconsistencies. Here are some suggestions to improve your multi-object printing:

1. Oozing: Ensure your retraction settings are adequate to prevent filament oozing between printed objects. Adjust retraction distance and speed in your slicer settings.

2. Cooling: Proper cooling is crucial for multi-object prints to prevent overheating and warping. Ensure your fan is working effectively and consider using a cooling tower or other methods to manage heat dissipation.

3. Bed Leveling: Check and calibrate your bed leveling to ensure each print layer adheres correctly. Poor bed leveling can cause uneven prints or adhesion issues between multiple objects.

4. Filament Quality: Ensure you are using high-quality PLA filament to avoid inconsistencies and improve print quality.

5. Slicer Settings: Experiment with different settings in your slicer software to optimize f...

WARNING: This response is AI generated and may contain errors.

[winged widget]

I cannot help but I gotta say those look super cool

[raven dew]

As soon as I get this to work
I will upload them
they are the Tarokka cards from DND curse of Stradh

[sly fulcrum]

Obligatory: Clean your bed with soap and water, you shouldn't need glue for PLA. On a textured bed, a first layer height of 0.1 mm can be to little to "squeeze" into the texture and have sufficient adhesion.

Does it always fail in the same spot on the bed?

[raven dew]

Thanks
The bed Is clean, I used glue because ir was not sticking
It doesn't fail in the same spot.

0.14 will be better??? I can't use raft because I want to have a good detail image

[raven dew]

adding a skirt or breem could help?

[sly fulcrum]

Yeah bit getting that removed when your print is barely thicker than the print could be a nightmare. A skirt does nothing for adhesion, its kinda just a purge line. Mouse ear brims could work

I would use something like 0.2 mm height for the first layer. Since your detail is on the bottom you don't really need the thinner layers anyways

[raven dew]

great
I will try

[tepid path]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[tepid path]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[raven dew]

That was the solution
thanks!!!

[sly fulcrum]

damns these look great