Info on Resin matrix pouring into fdm prints? | 3D Printing | Page 1

unreal boughBOT Sep 27, 2025, 10:17 AM

#

AI Help

It sounds like you're looking to create strong and impact-resistant parts using a combination of 3D printing, resin, and possibly reinforcement. While there may not be specific articles or papers on your exact method, there are a few general tips you can follow:

Consider Alternative Infill Patterns: Instead of a standard 100% infill, you can experiment with different infill patterns like gyroid, honeycomb, or cubic. These patterns can provide good strength while reducing material usage.
Resin Infusion: Adding resin to your prints can indeed help increase their strength. Make sure to choose a resin that bonds well with PLA+ and follow proper mixing and curing procedures.
Temperature Resistance: PLA+ has a lower heat resistance compared to some other filaments. If your parts will be exposed to temperatures near 60 degrees C, consider switching to a higher-temperature filament like PETG or ABS.
Reinforcements: While adding physical reinforcements may be ...

unreal boughBOT Sep 27, 2025, 12:18 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

analog veldt Sep 27, 2025, 12:19 PM

#

Pls open again

steel island Sep 27, 2025, 12:55 PM

#

what are you planning to print?

unreal boughBOT Sep 27, 2025, 2:58 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

scarlet storm Sep 29, 2025, 3:31 AM

#

analog veldt Pls open again

Sounds like you really need metal parts instead of plastic

#

Also: PLA+ would not be my first choice for your temperature resistance requirements

#

Would really help if we knew what you are trying to achieve here

unreal boughBOT Sep 29, 2025, 5:38 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

unreal boughBOT Sep 29, 2025, 3:01 PM

#

@analog veldt

nvi2x#0 please see the rule below:

Rule 4

No guns. No weapons. Absolutely no talk of making functional firearms or other weaponry. Weapons, or trainers, such as functional printed knives or guns, are not allowed.

scarlet storm Sep 29, 2025, 3:01 PM

#

Nope

#Info on Resin matrix pouring into fdm prints?