#supports

1 messages · Page 1 of 1 (latest)

torpid orchid
#

One message removed from a suspended account.

warm pumiceBOT
#
AI Help

It's important to ensure your 3D model has adequate supports to prevent print failure. You can try adjusting settings in your slicing software to generate additional supports if needed. There are various support plugins available for different slicing software programs, such as Meshmixer or Tree supports in PrusaSlicer, that can help enhance support structures for your model. Experimenting with different support settings can often help achieve better outcomes for your 3D prints.

WARNING: This response is AI generated and may contain errors.
unkempt echo
#

?supports

warm pumiceBOT
#

https://youtu.be/kSV2JeXQgm4
https://youtu.be/K_ZGZe-pbTI
https://youtu.be/Bj3jv5Vr2pw

YouTube
Maker's Muse
When support material fails... I do this. #3DP101

In this 3D Printing 101 I'll show you how to generate the strongest, most reliable support structures around! But be warned! These supports are only for models that need it... because they're incredibly tough.

The Ultimate Book of 3D Printing Tips and Tricks (FDM/FFF) - https://www.makersmuse.com/3dprintingtips

Example project files available...

▶ Play video
YouTube
Teaching Tech
Support material complete guide for 3D printing

Support material in 3D printing lets us defy gravity, but it does eat up additional filament and add time to the print. My patrons requested a guide on tuning support material settings in the slicer, so this video covers the most important parameters across a range of slicers, as well as ways to apply support more efficiently.

0:00 Introduction...

▶ Play video
YouTube
Lost In Tech
Perfect 3d Printed Undersides - Dial in your slicer's support setti...

Video sponsored by PCBWay - https://www.pcbway.com - PCB Manufacturing, 3d Printing, CNC parts, and more..
Also get $5 of credit if you sign up to PCBWay using this link https://www.pcbway.com/setinvite.aspx?inviteid=575537

3D Printing Supports - they're better. Better than even a couple of years ago. We should talk about that.

The printers...

▶ Play video