#Z Axis wont home

1 messages · Page 1 of 1 (latest)

barren sentinel
#

Hello guys, I got my old ender 3 (the first gen) out of the garage, struggled all day to get it out of the blue screen of death and now that I got it, the next issues..

The Z Axis, which is supposed to be stopped by the CR touch, is not homing. I'll attach a video so you can see what's going on. I'm using a SKR 3.0 V3 Mini and CR Touch, everything else is stock on it. I'm also using the SKR's firmware "Use bl touch for Z home" or something like that.

Anyone got any idea what I can do ?

dire lintelBOT
#
AI Help

It sounds like you are having trouble with your Z-axis homing on your Ender 3 with the SKR 3.0 V3 Mini and CR Touch. It's great that you've identified the firmware setting "Use BLTouch for Z home", as that is usually the correct setting for using a bed leveling sensor like the CR Touch.

Here are a few troubleshooting steps you can try:

  1. Check Wiring: Make sure the connections between the CR Touch, SKR 3.0 V3 Mini, and the printer controller board are secure and correctly connected. Loose connections can cause issues with the homing process.

  2. Z Offset: Ensure that your Z offset is properly set in the firmware. This will ensure that the printer moves to the correct height when homing.

  3. Test Sensor: Manually trigger the CR Touch to see if it is functioning correctly. When you trigger the sensor, the Z-axis should stop moving, indicating that the sensor is working properly.

  4. Firmware Configuration: Double-check the configuration in the firmware to ensure tha...

WARNING: This response is AI generated and may contain errors.
barren sentinel
#

No benchybot sadly none of that helped

dire lintelBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

barren sentinel
#

Anyone ?