Bulging layer lines PLA | 3D Printing | Page 1

tidal lichen Jun 28, 2025, 8:23 PM

#

I've been having all my recent prints have these layer lines after having almost none for about 9 months. Are there any settings in the slicer I can tweak to try and reduce these

spare oracleBOT Jun 28, 2025, 8:23 PM

#

tidal lichen I've been having all my recent prints have these layer lines after having almost...

#

AI Help

Yes, there are several settings in the slicer program you can adjust to try to reduce layer lines in your prints. You can try increasing the infill density, adjusting the printing speed, and adjusting the layer height. Additionally, ensuring your printer's belts are tight and lubricated can also help improve print quality.

spare oracleBOT Jun 28, 2025, 10:23 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

nocturne harbor Jun 29, 2025, 9:09 AM

#

tidal lichen I've been having all my recent prints have these layer lines after having almost...

Any chance it could be the nozzle wearing? 🤔

spare oracleBOT Jun 29, 2025, 11:13 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

tidal lichen Jun 29, 2025, 12:59 PM

#

The nozzle is only a month old and I've used no abrasive materials

#Bulging layer lines PLA