First time printing issues with Neptune S2 Elgoo (probably user error) | 3D Printing | Page 1

verbal smelt Jun 10, 2025, 11:05 PM

#

First time printing, but having some problems with actually getting anything to print, I've watched tutorials but I'd mostly like to figure out what kind of issue this is and what would help

cursive saffronBOT Jun 10, 2025, 11:05 PM

#

verbal smelt First time printing, but having some problems with actually getting anything to ...

#

AI Help

It sounds like you may be experiencing some common issues like bed leveling, nozzle clogging, or slicer settings. I can guide you through troubleshooting these problems to help you get your first successful print. Let's start by checking your bed leveling and making sure your nozzle is clean. If you have any specific error messages or details about what's going wrong, feel free to share them for more targeted assistance.

verbal smelt Jun 10, 2025, 11:11 PM

#

Cleaned my nozzle, and the way that I leveled was using a piece of paper, twisting until it had some give but still pulled out

#First time printing issues with Neptune S2 Elgoo (probably user error)