#Having issues with my Quidi X-Pro

1 messages · Page 1 of 1 (latest)

signal heron
#

I have been struggling to get my actual 3D Printer to work correctly, mosty due to my heavy issues with the filament getting tangled on the two nozzles as they are printing. I havent figured out what i should do as Im fairly incredibly lost, but I realize I really need help. Ive been trying to mess with the settings for a while but no matter what I do, they keep getting tangled and tear the print off the bed

subtle ventureBOT
#
AI Help

It sounds like you are experiencing issues with filament tangling during printing, which can lead to failed prints. Here are some troubleshooting tips that may help:

  1. Ensure that the spool of filament is feeding smoothly and is not getting caught or tangled on anything. You can try using a filament guide or holder to help with this.

  2. Check that the filament is loaded properly and is not getting twisted or tangled within the extruder assembly.

  3. Make sure the nozzle and bed are properly leveled to prevent the print from detaching mid-print.

  4. Adjust the retraction settings in your slicer software to minimize the chances of filament getting tangled. Increasing the retraction length and speed can help.

  5. Consider using a single-nozzle setup if possible to avoid the issue of filament tangling between two nozzles.

If you continue to experience issues, it may be helpful to reach out to the manufacturer of your 3D printer for further assistance or consult online forums for add...

WARNING: This response is AI generated and may contain errors.
sterile hinge
#

Photos?

signal heron
#

one sec

signal heron
#

Sorry thre is a video too, but uhh it wont upload

subtle ventureBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

signal heron
#

help

subtle ventureBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

signal heron
#

still help

subtle ventureBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

signal heron
#

quidich