Strange walls

[thick sandal]

Hi! I recently printed a bunny, and the walls have little gaps. Whats the problem? How can I solve it?

My printer: Creality Ender-3 V2 Neo
Noozle temp: 220 C
Bed temp: 60 C
Slicer: Ultimaker Cura

[unborn berry]

AI Help

Hello! It sounds like you may be experiencing under extrusion, which can cause gaps in the walls of your print. Here are a few possible solutions you can try:

1. Check your filament diameter settings in Ultimaker Cura to ensure they match the actual diameter of your filament. Incorrect settings can lead to under extrusion.

2. Make sure your nozzle is not clogged. A clogged nozzle can restrict the flow of filament and cause gaps in the print. You can try cleaning the nozzle using a cold pull or nozzle cleaning kit.

3. Adjust your printing temperature. While 220°C is a common temperature for PLA, you may need to increase or decrease it slightly based on your specific filament. Experiment with temperatures in small increments to find the optimal setting.

4. Increase your extrusion multiplier in Ultimaker Cura. This setting controls the amount of filament that is extruded. Increasing the multiplier slightly can help compensate for under extrusion.

5. Ensure your printer's filament ...

WARNING: This response is AI generated and may contain errors.