Improving seam | 3D Printing | Page 1

jolly garnet Apr 20, 2025, 2:38 PM

#

So here's my current seam. I need to imporve it to be as clean as possible. all suggestions welcome

umbral ermineBOT Apr 20, 2025, 2:38 PM

#

jolly garnet So here's my current seam. I need to imporve it to be as clean as possible. all ...

#

AI Help

I'm happy to help you with improving your seam on your 3D prints. Some common suggestions to achieve a cleaner seam include adjusting your slicer settings for more precise control, using a higher quality filament, optimizing your print temperature, and fine-tuning your retraction settings. Feel free to provide more details about your specific setup for further assistance.

jolly garnet Apr 20, 2025, 2:38 PM

#

#

Current seam settings

#

#

current seam result

#

it forms a buldge

#

Which ruins it as I need to print bearings

#

rn_image_picker_lib_temp_4b76ca83-5eee-4614-9179-a01b750ea33b.jpg

#

result at 50mm/s outter wall

#

seam quality reduces with increased speed - how to counteract?

#

Input shaping was calibrated, so was PA, as well as flow

#

rn_image_picker_lib_temp_9b1f46f4-712c-42d1-bbca-180d019b89eb.jpg

#

Result at 35mm/s

#

Significantly better

#

Though took nearly twice as long

#Improving seam