Peeling of layers

[dim dew]

Hi everyone, I have this problem with my print. Can someone help me?

[robust dew]

AI Help

Of course! Please describe the issue you are facing with your print, and I'll do my best to help you troubleshoot.

WARNING: This response is AI generated and may contain errors.

[quiet wharf]

could it be a loose nozzle or heatbreak?

[dim dew]

I noticed that when the platform moves, sometimes it makes a squeaking noise as if the bearings are rubbing

[quiet wharf]

this looks so ugly, maybe the nozzle rides through its own printed stuff...

I would start with first layer tests to see if this is fine and xy are also nice (by printing some geometric stuff)

did it ever print fine?

[robust dew]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[formal trellis]

thats very interesting...
do you have any other examples?

I'd almost suggest to run through a tuning guide with it, there's a bit going on there. with under-extrusion, possible too close z-offset.
if you find the z offset keeps changing on you, check for loose screw as suggested.

what printer?
what filament?
what temperatures?
any mods?

the underextrusion has many causes adn ideally we want eliminate as many of mechanical ones as possible first...

[robust dew]

Ellis' Print tuning guide
Follow this guide for easy print tuning
Guide

?tuning requested by: wolfesbluebox#0