#how do I prevent these shift layers in my resin printing?

1 messages · Page 1 of 1 (latest)

trim dew
#

lately i have more and more shift layers and I want to learn how to prevent them and what i'm soing wrong when I'm pre-supporting.

I'm using Mars 3 Pro and Sunlu's ABS-like resin.

image.png Screenshot_2025-03-29_134159.png image.png image.png image.png image.png image.png
hidden timberBOT
#
AI Help

Shifted layers can be caused by several factors, such as incorrect exposure settings, insufficient adhesion between layers, or mechanical issues with the printer. To prevent shifted layers, you can try the following:

  1. Ensure that your printer's build plate is securely attached and leveled properly.
  2. Check the resin tank for any resin residue or debris that may be affecting the print.
  3. Make sure your resin is properly mixed and has not expired.
  4. Double-check your exposure settings, including layer height, exposure time, and light intensity.

As for pre-supporting, make sure to add supports in areas with overhangs or where the model may have trouble printing properly. Use adequate supports but be careful not to over-support, as this can lead to difficulties in removing them after printing.

If you continue to experience shifted layers, consider reaching out to the manufacturer for further assistance or troubleshooting guides specific to the Mars 3 Pro printer and the Sunlu re...

WARNING: This response is AI generated and may contain errors.
hidden timberBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

trim dew
#

anyone?