How to fix String issues (Ender 5 Pro) | 3D Printing | Page 1

lilac summit Mar 5, 2025, 3:11 AM

#

As the title mentions, how do I fix this? (I've been doing the benchy boat model to see how to perfect my printer)
Things I've done:

Lowered the PLA Temperature from 210 to 180
Set the Retraction Length to 6mm
Lowered printing speed from 100 to 50

pliant pastureBOT Mar 5, 2025, 3:11 AM

#

#

AI Help

It sounds like you are experiencing some challenges with your 3D print. Here are a few troubleshooting tips that you can try:

Check your bed leveling: Make sure that your print bed is leveled properly. Improper bed leveling can cause issues with adhesion and overall print quality.
Increase first layer temperature: Since you have lowered the PLA temperature, try increasing the temperature slightly for the first layer to improve adhesion.
Adjust the cooling fan: Make sure that the cooling fan is working properly and not overcooling the print. Adjust the cooling settings to ensure proper layer adhesion.
Check for filament issues: Ensure that your filament is not tangled or causing any obstructions. You can try replacing the filament and see if that improves the print quality.

Hopefully, these tips can help you troubleshoot and improve your Benchy boat print!

faint schooner Mar 5, 2025, 3:14 AM

#

Check to see if the "Wipe" setting is on

#

What slicer are you using

lilac summit Mar 5, 2025, 3:14 AM

#

Creality Print 6.0

#

Let me check if it's on

lilac summit Mar 5, 2025, 3:15 AM

#

is it this?

copper shuttle Mar 5, 2025, 4:17 AM

#

check that and the box above it, the post retraction settings under printer

#

the creality slicer should be based off orca no, so also print a retraction tower from the top left calibrations, 3-10mm, if not then something else to generate a tower https://teachingtechyt.github.io/calibration.html#retraction

pliant pastureBOT Mar 5, 2025, 6:24 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

lilac summit Mar 5, 2025, 7:00 AM

#

hey jack, what do u mean about "the post retraction settings under printer"?

copper shuttle Mar 5, 2025, 7:05 AM

#

if its like orca, then this screen