Thermistor showing 0 degrees | 3D Printing | Page 1

unborn silo Feb 25, 2025, 1:46 AM

#

My thermistor is showing 0 degrees, idk what happened, I did this mod

pliant umbraBOT Feb 25, 2025, 1:46 AM

#

unborn silo My thermistor is showing 0 degrees, idk what happened, I did this mod

#

AI Help

It's possible that the thermistor connection was disrupted during the mod. Check the wiring to ensure it's properly connected and that there are no breaks in the wires. Also, make sure the thermistor is correctly positioned within the hotend. If everything looks good, you may need to replace the thermistor.

unborn silo Feb 25, 2025, 1:50 AM

#

When I turn on the pro there it starts at 9 Deg then goes down

pliant umbraBOT Feb 25, 2025, 3:51 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

chrome sapphire Feb 25, 2025, 1:21 PM

#

unborn silo When I turn on the pro there it starts at 9 Deg then goes down

thermistor problems, check your wiring

autumn patrol Feb 25, 2025, 2:09 PM

#

Yeah get the original cable chain back in there

pliant umbraBOT Feb 25, 2025, 4:11 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

unborn silo Feb 25, 2025, 5:02 PM

#

solved

#

?solved

#Thermistor showing 0 degrees