#Elegoo Saturn 4 Ultra Print Failing on Specific Object that should be easy to print. need help!

1 messages · Page 1 of 1 (latest)

supple merlin
#

Ieed Help: Elegoo Saturn 4 Ultra Print Failing on Specific Object

Hey everyone, I'm having trouble printing a specific object on my Elegoo Saturn 4 Ultra. Other objects print fine, but this one fails consistently. I’ve tried:

Printing with and without supports
Adding a raft/support plate
Adjusting orientation and placement
Despite these attempts, it still fails while other models print without issue. i had similar issues with cube like object and i'm a begenner so it must be the object is there any way to print this?

Screenshot_2025-02-08_at_12.27.54.png Screenshot_2025-02-08_at_12.27.48.png IMG_3637.HEIC
blazing spadeBOT
#
AI Help

It sounds like the specific object you're trying to print may have some unique geometry or features that are challenging for your printer to handle. Here are a few suggestions to try:

  1. Double-check the model: Make sure there are no errors or issues in the geometry of the specific object you're trying to print. You can use software like Meshmixer or Netfabb to repair any potential issues.

  2. Fine-tune your supports: Experiment with different support structures and settings to provide adequate support for the challenging areas of your object.

  3. Calibrate your printer: Ensure that your Elegoo Saturn 4 Ultra is properly calibrated, especially the bed leveling, exposure settings, and resin type.

  4. Consider resin and curing settings: The type of resin you're using and how you cure the print post-process can also impact the print quality.

If the issue persists, you may seek further advice from the Elegoo community forums or contact Elegoo customer support for more specific trouble...

WARNING: This response is AI generated and may contain errors.
thorn meteor
#

most people that do resin doesnt usually check the help-forum, and only #✅｜help-resin or #resin-dlp-sla

blazing spadeBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.