PA6-CF print warping help Q1 pro

[languid raven]

Hi im having issues with my print warping printing on a qidi q1 pro, standard plate with gluestick.
280c nozzle temp
0.6mm nozzle
0.3mm layer height
filament: https://printonion.com/tekniskt-datablad/pa6-kolfiber-tekniskt-datablad/

[cedar hedge]

AI Help

It sounds like you are experiencing issues with warping on your 3D print. Warping can occur due to various factors such as improper bed leveling, poor adhesion, or incorrect printing settings. Here are some troubleshooting steps you can try:

1. Ensure your bed is leveled correctly. Adjust the bed leveling screws or settings to make sure the distance between the nozzle and bed is consistent across the entire build plate.
2. Clean the build plate thoroughly with isopropyl alcohol to remove any residue that may affect adhesion.
3. Increase the bed temperature. For PA6 carbon fiber filament, you may need to increase the bed temperature to improve adhesion.
4. Try using a different adhesion method such as a brim or raft in your slicer settings.
5. Consider using a heated enclosure to maintain a stable printing environment, especially for large prints that are prone to warping.

If the issue persists, you may need to adjust your printing settings such as reducing the nozzle temperature o...

WARNING: This response is AI generated and may contain errors.