Bambu A1 random layer shift | 3D Printing | Page 1

tepid ginkgoBOT Dec 4, 2024, 3:56 PM

#

AI Help

It sounds like you may be experiencing layer shifting and inconsistencies in print quality. Layer shifting can be caused by various factors such as loose belts, insufficient stepper motor current, or mechanical obstructions. The small white dot could be due to debris on the print bed or a nozzle clog. I recommend checking and tightening all belts, ensuring proper stepper motor current, cleaning the print bed and nozzle, and calibrating your printer. If the issues persist, feel free to provide more details for further assistance.

feral mountain Dec 4, 2024, 3:57 PM

#

Anybody that could help me?
I had a weird layer shift

The second picture is from the far back one, it printes one by one not all together, I haven’t calibrated or changed anything this is fully stock Bambu labs A1 anybody knows why this layer shift happend? Or why the first one the small white dot happend?

#

#

After this print I wiped the bed quickly with a micro fiber cloth and restarted the print without changing anything

#

#

The back one didn’t hold to the bed because it fell off the bed

#

This is PLA from 123.3D because Bambu labs wouldn’t sent me any filament when I asked it 😂

#

Also I haven’t done any calibrations or fine tunes or anything to it

tepid ginkgoBOT Dec 4, 2024, 6:03 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

tepid ginkgoBOT Dec 4, 2024, 8:08 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

feral mountain Dec 4, 2024, 8:09 PM

#

Didn’t I set my inactivity to 1 week 😤 😅

feral kernel Dec 4, 2024, 8:18 PM

#

im not seeing any layer shifts. to me it just looks like simple bed adhesion. it has mininumum contact with the bed. print slower, add a brim. run arachne generator rather than classic MIGHT help too in this case since their so thin

tepid ginkgoBOT Dec 4, 2024, 10:18 PM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

feral mountain Dec 5, 2024, 12:58 AM

#

feral kernel im not seeing any layer shifts. to me it just looks like simple bed adhesion. it...

But this one did stuck to the bed so this would be layer shift right?

#

But yeah thanks for the help an ideas

feral kernel Dec 5, 2024, 12:59 AM

#

looks like a droopy mess to me. not a layer shift

#

but i suppose it being circular can throw off the perception of it being a layer shift

#

i really dont think it is though

#

its even around

#

not one more than the other side. its even

tepid ginkgoBOT Dec 5, 2024, 3:03 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

feral mountain Dec 5, 2024, 4:26 PM

#

feral kernel looks like a droopy mess to me. not a layer shift

Never heard about that how can I fix it? Or do u mean like a clog of something?

feral kernel Dec 5, 2024, 5:39 PM

#

Speed typically. Faster or slower. Smaller layer height

#Bambu A1 random layer shift