#Sticking but not that well?

1 messages · Page 1 of 1 (latest)

fair rapids
#

it sticks, but doesnt at the same time i think its the bed adhesion, because it sticks better in some spots rather than others, but not sure

IMG_0683.jpg
empty flameBOT
#
AI Help

It sounds like you may be experiencing inconsistent bed adhesion. Here are a few troubleshooting steps you can try:

  1. Level your bed: Make sure your print bed is properly leveled. Adjust the bed leveling screws or knobs to ensure that the nozzle is at the correct distance from the bed across all points.

  2. Clean the build surface: Clean the build surface with isopropyl alcohol to remove any debris, oils, or residues that may be affecting adhesion.

  3. Use a proper adhesive: Consider using additional adhesives like glue stick, hairspray, or painter's tape to improve bed adhesion.

  4. Adjust bed temperature: If you are printing with a heated bed, try adjusting the temperature slightly to find the optimal temperature for good adhesion.

If you continue to have issues, feel free to provide more details for further assistance.

WARNING: This response is AI generated and may contain errors.
fair rapids
#

it looks like this

IMG_0684.jpg