gentle cape
hey, im trying to mod my ender 3 into a conveyor belt printer, but i sorta ran into a dead end when i saw the the only store that sold pointier nozzles closed his shop: https://powerbelt3d.com/product/conveyor-belt-3d-printer-nozzles/
i KNOW that there's an alternative, im here to ask if anyone know if the project works if the nozzle is stock
heres the video: https://www.youtube.com/watch?v=ViQGZFbM22M
viscid gustBOT
hey, im trying to mod my ender 3 into a conveyor belt printer, but i sorta ran i...
golden zealot
hey, im trying to mod my ender 3 into a conveyor belt printer, but i sorta ran i...
I mean you could modify it to accept a Revo hotend with their non-planar nozzles
Or try some V6s with airbrush tips
gentle cape
but revo hotends are flatter not sharper
golden zealot
but revo hotends are flatter not sharper
Revo has a non-planar nozzle
golden zealot
but revo hotends are flatter not sharper
gentle cape
do you think it's as sharp as this
golden zealot
do you think it's as sharp as this
Why do you need sharpness?
Both would work fine on a belt printer
gentle cape
because the nozzle would need to print at an angle
gentle cape
Both would work fine on a belt printer
so youre saying the stock nozzle works fine?
golden zealot
because the nozzle would need to print at an angle
That nozzle is made to print at an angle
golden zealot
so youre saying the stock nozzle works fine?
What stock nozzle. What do you currently have
golden zealot
the normal one thats comes with the ener 3
The Revo one is longer, pointy-er, and doesn't have a chonky heatblock
gentle cape
alright then, what would it take to add this to an ender 3?
golden zealot
Dunno, it's probably been done before though.
gentle cape
Or try some V6s with airbrush tips
this seems like a better idea
https://www.aliexpress.com/item/1005001359670804.html?
does this work with my printer?
golden zealot
https://www.aliexpress.com/item/1005001359670804.html?
does this work with my pr...
If you got a V6 compatible hotend, yes
gentle cape
soooo the stock ender 3 hotend works?
the nozzles that go on it are 6mm diameter so im assuming thats what V6 or M6x1 means
severe sable
the nozzles that go on it are 6mm diameter so im assuming thats what V6 or M6x1 ...
v6 denotes e3d v6 and it has slightly longer threads then mk8(in this case what creality uses) and the threads are 1mm thick but the width of the overal threaded part is 6mm across
both are m6x1 just the length of the nozzle plays an important part so that you dont create unessary jam
severe sable
the gap between the nozzle and the heat break could cause jams the gap between the nozzle and heat block is normal
gentle cape
so what is a simple solution for this? an adapter or a spacer of sorts?
golden zealot
Just get a new hotend
severe sable
https://e3d-online.com/products/revo-belt-nozzles
this
golden zealot
so what is a simple solution for this? an adapter or a spacer of sorts?
TZ E3 2.0 is like 20 bucks, can be mounted on your printer without major adjustment, and uses V6 nozzles
gentle cape
TZ E3 2.0 is like 20 bucks, can be mounted on your printer without major adjustm...
Does this work?
I broke its thermometer while back and put the normal hotend back in
severe sable
thermistor
golden zealot
You need a new thermistor but yes it works
gentle cape
https://www.aliexpress.com/item/1005006225604778.html
this is the link to it
it says CHT nozzle
golden zealot
You need a new thermistor but yes it works
.
gentle cape
You need a new thermistor but yes it works
Cant seem to find a replacement just by looking up whats written on it
gentle cape
.
does this work?
https://www.aliexpress.com/item/32816085854.html
viscid gustBOT
gentle cape
why
