# AI Help To reduce or eliminate layer lines on your prints, you can try the following: Decrease the printing speed: Lower the print speed to allow more time for each layer to cool and solidify properly. Adjust layer height: Try using a smaller layer height for finer details and smoother surfaces. Increase the number of top and bottom layers: Adding more top and bottom layers can help fill in gaps and create a smoother surface finish. Fine-tune print temperature: Ensure you are printing at the recommended temperature for your filament to prevent issues like under-extrusion. Check for mechanical issues: Make sure your printer is well-calibrated and that all parts are properly tightened. Printing at 300mm/s is extremely fast and may be contributing to the layer lines. Consider lowering the speed for better print quality.
# This post has been closed due to inactivity. This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.
dusky grail
bright edge