#Anycubic Kobra 3 Collapse Katana Settings?

1 messages · Page 1 of 1 (latest)

sweet wolf
#

I need all the settings for it. i tried normal settings. well (it did work but only a few came out and most of the time it got stuck) so now im trying to find good settings. so if anybody has any settings that would be awesome

bleak fractalBOT
#
AI Help

For best results, it's important to provide more specific details about your 3D printer model and the material you're using. In general, common settings to adjust include layer height, print speed, temperature, and retraction settings. If you're experiencing clogging or print issues, you may want to check the nozzle for any debris, ensure the filament is feeding smoothly, and calibrate the bed level. Experimenting with different settings and running calibration tests can help you find the optimal configuration for your prints.

WARNING: This response is AI generated and may contain errors.
cyan saddle
#

You should tune your printer, each printer is gonna have different settings, for a collapsible katana, I would suggest tuning your flow and PA/LA

#

PA/LA = Pressure Advance/Linear Advance

They're the same thing, just different naming schemes across different firmware

bleak fractalBOT
#

Ellis' Print tuning guide
Follow this guide for easy print tuning
Guide

?tuning requested by: adib07#0
cyan saddle
#

Here's how to tune them ☝️

sweet wolf
#

i already did that

cyan saddle
#

Whats the values for the flow and PA?

sweet wolf
#

PA: 220-240°C (nozzle)

PA: 60-80°C (bed)

cyan saddle
#

Those are the temperature

#

And what filament?

sweet wolf
#

Anycubic Interstellar Violet PLA

cyan saddle
#

80c for the bed is really hot for PLA

#

You want it to be at 60c

cyan saddle