ender 3 v2 | 3D Printing | Page 1

timid bronze Oct 19, 2024, 11:13 PM

#

So im having issues with clogging

I replaced the hotend the fans the bowden tube the nozzle
And nothing seems to work i got it too printfor 2 hours with the new hotend and fans but then the hotend clogs up and im here cleaning it up could it be the settings?

elder ferryBOT Oct 19, 2024, 11:13 PM

#

timid bronze So im having issues with clogging I replaced the hotend the fans the bowden tu...

#

AI Help

It's good that you've already replaced several parts to troubleshoot the issue. If clogging persists after replacing those components, it's possible that the settings could be a factor. Ensure that your print temperature, retraction settings, and filament type are all dialed in correctly. Additionally, make sure that the hotend is properly assembled and that there are no obstructions in the extruder path. If the problem continues, you may want to check for any irregularities in your filament or consider trying a different brand.

timid bronze Oct 19, 2024, 11:14 PM

#

Im using pla
No enclosure
Ender 3 v2
200 on the hot end for temp
60 for the bed
Speed of 70

elder ferryBOT Oct 20, 2024, 1:16 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

timid bronze Oct 20, 2024, 1:18 AM

#

Bump

#ender 3 v2