#Printing problem on the side of print

1 messages · Page 1 of 1 (latest)

hot imp
#

sorry for bad quality of picture but there are some like strings on side, can i do anything to help it?

IMG_2556.png 95358B90-A4FD-47CF-BD81-C263FACFCD0E.jpg
blissful depotBOT
#
AI Help

It looks like you are experiencing stringing with your 3D print. Some common solutions to reduce stringing include adjusting the retraction settings in your slicer software, increasing travel speed, lowering the printing temperature, and ensuring proper calibration of the extruder. Experiment with these settings to see which works best for your specific printer and filament.

WARNING: This response is AI generated and may contain errors.
hot imp
#

i use Cura 5.6.0 slicer

#

and i have Ctc Diy I3 printer absolute cheap garbage but prints well sometime

blissful depotBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

hot imp
#

yeah