3d printing error | 3D Printing | Page 1

whole ibex Sep 15, 2024, 5:46 PM

#

I dont know what to do. My print starts great and it goes like this for a long time but around half way something happens and it slides to the side just look at the pictures. I am using a Sovol sv06. The little square was gone too for some reason.

keen stumpBOT Sep 15, 2024, 5:46 PM

#

whole ibex I dont know what to do. My print starts great and it goes like this for a long t...

#

AI Help

It looks like your print is experiencing layer shifting, which can be caused by various factors such as loose belts, overheating stepper motors, or mechanical obstructions. Make sure all belts are properly tensioned, stepper motors are running at a safe temperature, and there are no physical obstructions in the build area. Also, check the bed leveling and ensure the print surface is clean and properly adhered to the bed. If the issue persists, feel free to provide more details for further assistance.

tiny mountain Sep 15, 2024, 5:47 PM

#

That's a layer shift. Typically caused by a mechanical error/problem. Either your stepper is skipping, or the build plate physically moves, etc.

whole ibex Sep 15, 2024, 6:15 PM

#

?solved

#3d printing error