Upgrading wnder 3 pro to klipper | 3D Printing | Page 2

last valve Aug 30, 2024, 1:14 PM

#

Understood

#

This?

#

So I go into nano, then crtl+x, right?

#

AFter which I input commands

tranquil sandal Aug 30, 2024, 1:20 PM

#

last valve This?

once after you done the sudo nano /etc/apt/sources.list

#

and commented the cdrom

last valve Aug 30, 2024, 1:20 PM

#

#ign1:1 cdrom://[Debian GNU/Linux 12.6.0 bookworm - Official i386 Binary-1 with firmware 20240629-10:19] bookworm Inrelease
Err:2 cdrom://[Debian GNU/Linux 12.6.0 bookworm - Official i386 Binary-1 with firmware 20240629-10:19] bookworm rerelease
Please use apt-cdrom to make this cd-rom recognized by apt. apt-get update cannot be used to add new cd-ROMs

tranquil sandal Aug 30, 2024, 1:21 PM

#

you forgot to do the nano again

last valve Aug 30, 2024, 1:21 PM

#

I did

tranquil sandal Aug 30, 2024, 1:21 PM

#

it should not say cdrom tbh

#

you haven't commented the CDrom on /etc/apt/sources.list

last valve Aug 30, 2024, 1:22 PM

#

I see it now

#

#cdrom: [Debian GNU/Linus 12.6.0 Bookworm - Official i386 DVD Binary-1 with firmware 2-240629-10@19]/ bookworm contrib main non-free-firmware

tranquil sandal Aug 30, 2024, 1:23 PM

#

yes

#

something like that

#

save and exit

last valve Aug 30, 2024, 1:24 PM

#

Thats the only thing with cdrom

#

Alr

#

What now?

tranquil sandal Aug 30, 2024, 1:24 PM

#

now try and update again with this

last valve Aug 30, 2024, 1:24 PM

#

Do I completely exit nano?:

tranquil sandal Aug 30, 2024, 1:24 PM

#

yes

#

save and exit nano

last valve Aug 30, 2024, 1:25 PM

#

gotta re-login

#

Same thing as before

#

git is already the newest version, so that's something

tranquil sandal Aug 30, 2024, 1:26 PM

#

oh its now installed

#

convenient, step 2 of the kiauh should do fine

last valve Aug 30, 2024, 1:27 PM

#

tranquil sandal now try and update again with this

That's the one that can't be done

tranquil sandal Aug 30, 2024, 1:27 PM

#

can you try the normal update

last valve Aug 30, 2024, 1:27 PM

#

This, yes? 'cd ~ && git clone https://github.com/dw-0/kiauh.git'

tranquil sandal Aug 30, 2024, 1:27 PM

#

sudo apt-get update

#

just that

last valve Aug 30, 2024, 1:28 PM

#

same thing

#

Updating from such a repository cannot be done securely

#

and is therefore disabled by deafult

tranquil sandal Aug 30, 2024, 1:28 PM

#

okay go back to /etc/apt/sources.list

last valve Aug 30, 2024, 1:28 PM

#

In nano?

tranquil sandal Aug 30, 2024, 1:29 PM

#

yep

last valve Aug 30, 2024, 1:29 PM

#

'sudo nano /etc/apt/sources.list'

tranquil sandal Aug 30, 2024, 1:29 PM

#

then add [trusted=yes] on deb [trusted=yes] cdrom:[Debian GNU/Linux

last valve Aug 30, 2024, 1:29 PM

#

Where to?

tranquil sandal Aug 30, 2024, 1:29 PM

#

deb cdrom:[Debian GNU/Linux

#

I'd like to SSH to the machine tbh to work on it but setting up port forwarding is pain

last valve Aug 30, 2024, 1:30 PM

#

oo it;s blue

#

ok exited completely out of nano, re0logging on

last valve Aug 30, 2024, 1:31 PM

#

tranquil sandal ```sudo apt-get update```

Worked

#

I think

#

Yep, worked

tranquil sandal Aug 30, 2024, 1:31 PM

#

now do step 2 of kiauh

last valve Aug 30, 2024, 1:32 PM

#

cd ~ && git clone https://github.com/dw-0/kiauh.git

GitHub

GitHub - dw-0/kiauh: Klipper Installation And Update Helper

Klipper Installation And Update Helper. Contribute to dw-0/kiauh development by creating an account on GitHub.

tranquil sandal Aug 30, 2024, 1:32 PM

#

yeah

last valve Aug 30, 2024, 1:32 PM

#

Done

tranquil sandal Aug 30, 2024, 1:32 PM

#

follow kiauh for this

last valve Aug 30, 2024, 1:33 PM

#

Step 3 now

#

Alr, I'm at a menu

#

The kiauh menu

#

What now?

cerulean meteor Aug 30, 2024, 1:34 PM

#

now you choose install

#

and then choose what you want to install

tranquil sandal Aug 30, 2024, 1:35 PM

#

recommend to use mainsail tbh

last valve Aug 30, 2024, 1:35 PM

#

1Mon will help

#

I think

#

@undone bane I summon forth

tranquil sandal Aug 30, 2024, 1:35 PM

#

@undone bane you'll help apparently

last valve Aug 30, 2024, 1:36 PM

#

tranquil sandal <@537050499413966858> you'll help apparently

I mean you told him to

undone bane Aug 30, 2024, 1:36 PM

#

uh hi

last valve Aug 30, 2024, 1:36 PM

#

undone bane uh hi

hai

#

I'm at the kiauh menu

undone bane Aug 30, 2024, 1:36 PM

#

send me a ss

tranquil sandal Aug 30, 2024, 1:36 PM

#

he's on the kiauh menu now, the linux part is done

last valve Aug 30, 2024, 1:36 PM

#

rn_image_picker_lib_temp_46fcabdd-06ce-4185-83db-a959035a1286.jpg

undone bane Aug 30, 2024, 1:36 PM

#

ok cool

#

install klipper

last valve Aug 30, 2024, 1:37 PM

#

ok

undone bane Aug 30, 2024, 1:37 PM

#

and moon raker

#

and mainsail

last valve Aug 30, 2024, 1:37 PM

#

how many number of klipper instances?

cerulean meteor Aug 30, 2024, 1:37 PM

#

1 if youre only doing 1 printer

undone bane Aug 30, 2024, 1:37 PM

#

1

last valve Aug 30, 2024, 1:37 PM

#

Ok

#

It's working it's magics

last valve Aug 30, 2024, 1:38 PM

#

undone bane and mainsail

Anything else?

#

Klipperscreen, e.t.c?

undone bane Aug 30, 2024, 1:38 PM

#

i’m not sure if klipper screen works on the kinda screen the ender has

tranquil sandal Aug 30, 2024, 1:38 PM

#

do you really want to use your laptop as a screen for klipper tbh

last valve Aug 30, 2024, 1:39 PM

#

tranquil sandal do you really want to use your laptop as a screen for klipper tbh

The laptop itself is good

tranquil sandal Aug 30, 2024, 1:39 PM

#

klipperscreen is only available afaik to the main display of a pi/laptop

last valve Aug 30, 2024, 1:39 PM

#

I have space to accomodate it next to printer

tranquil sandal Aug 30, 2024, 1:39 PM

#

klipper has its custom UI for the LCD built in

last valve Aug 30, 2024, 1:39 PM

#

So what do you recomment?

undone bane Aug 30, 2024, 1:39 PM

#

you don’t need it

#

i wouldn’t use it

last valve Aug 30, 2024, 1:39 PM

#

Ok what the

tranquil sandal Aug 30, 2024, 1:39 PM

#

I'd prolly say do mainsail

last valve Aug 30, 2024, 1:39 PM

#

Media change: insert the disk label;ed

undone bane Aug 30, 2024, 1:39 PM

#

mainsail or fluidd

last valve Aug 30, 2024, 1:40 PM

#

'Debian GNU/Linux 12.6.0

#

In the drive '/media/cdrom/

tranquil sandal Aug 30, 2024, 1:40 PM

#

oof its another Linux apt issue

last valve Aug 30, 2024, 1:40 PM

#

Fixeable?

tranquil sandal Aug 30, 2024, 1:40 PM

#

why is apt not cooperating 💀

last valve Aug 30, 2024, 1:40 PM

#

tranquil sandal why is apt not cooperating 💀

I told you, my laptop is cursed

tranquil sandal Aug 30, 2024, 1:41 PM

#

cdrom should have been disabled in /etc/apt/sources.list

undone bane Aug 30, 2024, 1:41 PM

#

tranquil sandal why is apt not cooperating 💀

i hope u have this covered bc i don’t really know linux

last valve Aug 30, 2024, 1:41 PM

#

undone bane i hope u have this covered bc i don’t really know linux

Neither do I ;)

tranquil sandal Aug 30, 2024, 1:41 PM

#

undone bane i hope u have this covered bc i don’t really know linux

this is usually the part of /etc/apt/sources.list

#

commenting the cdrom on slightly fucked installations will fix it usually

last valve Aug 30, 2024, 1:42 PM

#

usually

tranquil sandal Aug 30, 2024, 1:42 PM

#

can you do sudo nano /etc/apt/sources.list and screenie

last valve Aug 30, 2024, 1:43 PM

#

tranquil sandal can you do sudo nano /etc/apt/sources.list and screenie

I put that in now it's doing something

tranquil sandal Aug 30, 2024, 1:43 PM

#

can you also do an
ls /etc/apt/sources.list.d/*

#

and ls /etc/apt/*

last valve Aug 30, 2024, 1:43 PM

#

I think it's installing it-

#

I put the command in after the insert media

#

It's unpacking so mnay things

cerulean meteor Aug 30, 2024, 1:44 PM

#

what? wait why is it installing? am i misunderstanding something? @tranquil sandal

last valve Aug 30, 2024, 1:44 PM

#

cerulean meteor what? wait why is it installing? am i misunderstanding something? <@539420021110...

What chinese magic is going on!?!?!?

tranquil sandal Aug 30, 2024, 1:44 PM

#

he's having issues with apt

#

he's still in the KIAUH install script tho

last valve Aug 30, 2024, 1:45 PM

#

Is it supposed to install?

cerulean meteor Aug 30, 2024, 1:45 PM

#

yeah but nano is just a text editor no?

tranquil sandal Aug 30, 2024, 1:45 PM

#

no

last valve Aug 30, 2024, 1:45 PM

#

tranquil sandal he's still in the KIAUH install script tho

Did that fuck it up?

tranquil sandal Aug 30, 2024, 1:45 PM

#

he hasn't exited the kiauh yet

cerulean meteor Aug 30, 2024, 1:45 PM

#

oh right

tranquil sandal Aug 30, 2024, 1:45 PM

#

commands don't work unless you exit that

last valve Aug 30, 2024, 1:45 PM

#

tranquil sandal commands don't work unless you exit that

Then why is it unpacking this and setting up stuff?

tranquil sandal Aug 30, 2024, 1:46 PM

#

wait for it

#

🤷

last valve Aug 30, 2024, 1:46 PM

#

'klipper packages installed'

undone bane Aug 30, 2024, 1:46 PM

#

probably worked then? maybe

tranquil sandal Aug 30, 2024, 1:46 PM

#

oh I bet it just installed klipper without the dependencies

last valve Aug 30, 2024, 1:46 PM

#

rn_image_picker_lib_temp_ce4a74ff-a783-4bb5-ab8a-e4a66033725d.jpg

tranquil sandal Aug 30, 2024, 1:46 PM

#

that thing will not work

undone bane Aug 30, 2024, 1:46 PM

#

install dependencies too

tranquil sandal Aug 30, 2024, 1:46 PM

#

well it actually didn't

#

it actually installed the dependencies

#

wtf

undone bane Aug 30, 2024, 1:47 PM

#

wtf

last valve Aug 30, 2024, 1:47 PM

#

occult laptop

undone bane Aug 30, 2024, 1:47 PM

#

ok sometimes magic happens and we gotta roll with it

last valve Aug 30, 2024, 1:47 PM

#

undone bane ok sometimes magic happens and we gotta roll with it

Well said

undone bane Aug 30, 2024, 1:47 PM

#

ok so install moonraker now

last valve Aug 30, 2024, 1:47 PM

#

rn_image_picker_lib_temp_c4e68a2a-b08a-4a5a-a103-7b709a03459a.jpg

#

y/n?

tranquil sandal Aug 30, 2024, 1:48 PM

#

y

last valve Aug 30, 2024, 1:48 PM

#

success

#

Time for moonraker

#

same problem

#

Should i do the command?

#

sudo nano /etc/apt/sources.list

tranquil sandal Aug 30, 2024, 1:49 PM

#

send what you see

#

you are still in kiauh

#

that command won't work

last valve Aug 30, 2024, 1:49 PM

#

rn_image_picker_lib_temp_9e29c39e-9e6d-4a34-9fbd-00796ecc795c.jpg

last valve Aug 30, 2024, 1:49 PM

#

tranquil sandal that command won't work

But it did for klipper

tranquil sandal Aug 30, 2024, 1:50 PM

#

why is that back wtf

last valve Aug 30, 2024, 1:50 PM

#

I will do it

#

For sience

tranquil sandal Aug 30, 2024, 1:50 PM

#

press enter

last valve Aug 30, 2024, 1:50 PM

#

it's fucking installing

#

with 'sudo nano /etc/apt/sources.list'

undone bane Aug 30, 2024, 1:50 PM

#

lmao

last valve Aug 30, 2024, 1:50 PM

#

💀

tranquil sandal Aug 30, 2024, 1:50 PM

#

lmao

undone bane Aug 30, 2024, 1:50 PM

#

magic computer

#

let it do its thing ig

#

if it works it works

tranquil sandal Aug 30, 2024, 1:50 PM

#

bro, it could have been its just working with enter

#

once you typed it in

undone bane Aug 30, 2024, 1:51 PM

#

that’s true

last valve Aug 30, 2024, 1:51 PM

#

tranquil sandal bro, it could have been its just working with enter

I'll see with the next install

#

'mainsail'

tranquil sandal Aug 30, 2024, 1:51 PM

#

it literally says there
Please insert cd rom thingy and press [Enter]

undone bane Aug 30, 2024, 1:51 PM

#

mainsail or fluidd depends on if your sane or not

tranquil sandal Aug 30, 2024, 1:51 PM

#

mainsail is actually pretty good

#

recommend

last valve Aug 30, 2024, 1:51 PM

#

Say no more

undone bane Aug 30, 2024, 1:51 PM

#

i can help with mainsail (the sane option) so i’d pick that

tranquil sandal Aug 30, 2024, 1:52 PM

#

you can use mobileraker later on with mainsail

last valve Aug 30, 2024, 1:52 PM

#

Allows me to control printer via phone?

tranquil sandal Aug 30, 2024, 1:52 PM

#

yep

last valve Aug 30, 2024, 1:52 PM

#

Good, it's pretty far away from my workstation since I moved it

#

Don't wanna be running back n forth

undone bane Aug 30, 2024, 1:53 PM

#

installed?

last valve Aug 30, 2024, 1:53 PM

#

Not yet

#

It's building a wheel for pillow

tranquil sandal Aug 30, 2024, 1:53 PM

#

his wifi card is slow @undone bane

#

figures its slow because its an atom laptop lmao

last valve Aug 30, 2024, 1:54 PM

#

tranquil sandal figures its slow because its an atom laptop lmao

ye

#

Almost done, I reckon

#

It built a wheel

tranquil sandal Aug 30, 2024, 1:54 PM

#

ha?

undone bane Aug 30, 2024, 1:54 PM

#

ah lmao

tranquil sandal Aug 30, 2024, 1:54 PM

#

idk kiauh so... wut

last valve Aug 30, 2024, 1:54 PM

#

Alr, now onto mainsail

undone bane Aug 30, 2024, 1:54 PM

#

eyy

last valve Aug 30, 2024, 1:55 PM

#

Seems to be going fine

undone bane Aug 30, 2024, 1:55 PM

#

nice

last valve Aug 30, 2024, 1:55 PM

#

It's done!

#

What now?

undone bane Aug 30, 2024, 1:56 PM

#

on a different device go to the printer/laptops ip address

last valve Aug 30, 2024, 1:56 PM

#

undone bane on a different device go to the printer/laptops ip address

How on earth do I do that?

undone bane Aug 30, 2024, 1:56 PM

#

what service do u use for wifi

tranquil sandal Aug 30, 2024, 1:56 PM

#

bro what

last valve Aug 30, 2024, 1:57 PM

#

And does it matter which device? i.e. Main PC or Mobile?

last valve Aug 30, 2024, 1:57 PM

#

undone bane what service do u use for wifi

Vadaphone

tranquil sandal Aug 30, 2024, 1:57 PM

#

to know your ip address, do ip a

last valve Aug 30, 2024, 1:57 PM

#

or vadafone i don't remember

#

found it

#

For laptop

#

there's 2...

#

one with scope global

undone bane Aug 30, 2024, 1:58 PM

#

tranquil sandal to know your ip address, do ip a

do this then on any other device on the same wifi type that into the top bar of your browser

last valve Aug 30, 2024, 1:58 PM

#

Alr

undone bane Aug 30, 2024, 1:58 PM

#

should be like 192.168.1.xxx

tranquil sandal Aug 30, 2024, 1:58 PM

#

ip a should output the network interfaces and their corresponding IP addresses

last valve Aug 30, 2024, 1:59 PM

#

Ok I'm in

tranquil sandal Aug 30, 2024, 1:59 PM

#

wifi is usually prefixed as enp, wlp

#

next to the inet, is your ip address

undone bane Aug 30, 2024, 1:59 PM

#

nice send a ss

tranquil sandal Aug 30, 2024, 2:00 PM

#

    link/ether 28:cd:c4:d1:95:e9 brd ff:ff:ff:ff:ff:ff

    [[inet 192.168.2.190/24(YOUR IP ADDRESS IS THIS)]] brd 192.168.2.255 scope global dynamic noprefixroute wlp4s0

       valid_lft 82397sec preferred_lft 82397sec
    inet6 fe80::9f06:f0ae:16cb:69dc/64 scope link noprefixroute

last valve Aug 30, 2024, 2:00 PM

#

tranquil sandal Aug 30, 2024, 2:00 PM

#

nice

undone bane Aug 30, 2024, 2:00 PM

#

eyyy your in

tranquil sandal Aug 30, 2024, 2:00 PM

#

iits working

last valve Aug 30, 2024, 2:00 PM

#

For some reason it says error

#

On the tab

#

Not sure what that's about

undone bane Aug 30, 2024, 2:00 PM

#

what error

tranquil sandal Aug 30, 2024, 2:00 PM

#

that's normal lmao

#

send the error message

last valve Aug 30, 2024, 2:00 PM

#

'ERROR'

tranquil sandal Aug 30, 2024, 2:00 PM

#

not that

#

send the image of the whole tab

last valve Aug 30, 2024, 2:01 PM

#

tranquil sandal Aug 30, 2024, 2:01 PM

#

connect your printer

undone bane Aug 30, 2024, 2:01 PM

#

ok ok

tranquil sandal Aug 30, 2024, 2:01 PM

#

wait I forgot he didn't compile the firmware for his printer lmao

undone bane Aug 30, 2024, 2:01 PM

#

lmaoo

last valve Aug 30, 2024, 2:01 PM

#

;-;

#

So what now

tranquil sandal Aug 30, 2024, 2:02 PM

#

on the laptop

last valve Aug 30, 2024, 2:02 PM

#

Do I connect it to printer

#

via usb?

tranquil sandal Aug 30, 2024, 2:02 PM

#

do git clone https://github.com/Klipper3d/klipper

#

not yet

#

we'll have to compile klipper for your mobo

last valve Aug 30, 2024, 2:02 PM

#

It's fatal!

#

Destination path 'klipper' already exists and is not an empty directory

tranquil sandal Aug 30, 2024, 2:03 PM

#

wait

#

its an ender 3 pro

last valve Aug 30, 2024, 2:03 PM

#

ye

tranquil sandal Aug 30, 2024, 2:03 PM

#

it doesn't support usb flashing

last valve Aug 30, 2024, 2:03 PM

#

fuck

#

Not good?

tranquil sandal Aug 30, 2024, 2:03 PM

#

you'll have to take out the file to a usb drive

#

and that is quite annoying on non-gui systems

last valve Aug 30, 2024, 2:04 PM

#

Let me clear it though

#

It's still flashed

tranquil sandal Aug 30, 2024, 2:04 PM

#

lets keep compiling first, then we'll extract the thingy out of your laptop

#

do mkdir newklippy; cd newklippy

#

then git clone https://github.com/Klipper3d/klipper

#

after that finishes,
cd klipper

last valve Aug 30, 2024, 2:05 PM

#

ok

#

6 miB/s

#

That's not the worst

#

ok, done

#

What next?

tranquil sandal Aug 30, 2024, 2:06 PM

#

tranquil sandal after that finishes, ``cd klipper``

then make menuconfig after you do this

last valve Aug 30, 2024, 2:07 PM

#

Ok

#

Now theres a grey screen with orange accent

tranquil sandal Aug 30, 2024, 2:07 PM

#

that's the klipper menuconfig

last valve Aug 30, 2024, 2:07 PM

#

Ok

tranquil sandal Aug 30, 2024, 2:07 PM

#

@undone bane do you have any idea how to compile klipper to an ender 3 pro

#

I don't remember the exact settings to compile it

last valve Aug 30, 2024, 2:08 PM

#

Foudn this https://www.obico.io/blog/install-klipper-ender-3/

How to Install Klipper on the Ender 3 (With Mainsail OS) | Obico Kn...

Klipper has recently caught many eyeballs with its fantastic features and utility for 3D printing. It's a firmware that runs off a Raspberry Pi board and lets you execute high-speed 3D printing and extract the most out of your 3D printer. It has improved motion planning and precise stepper motor control and delivers excellent print quality with ...

tranquil sandal Aug 30, 2024, 2:08 PM

#

looking at this though
https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3pro-2020.cfg

GitHub

klipper/config/printer-creality-ender3pro-2020.cfg at master · Klip...

Klipper is a 3d-printer firmware. Contribute to Klipper3d/klipper development by creating an account on GitHub.

#

# This file contains pin mappings for the stock 2020 Creality Ender 3
# Pro with the 32-bit Creality 4.2.2 board. To use this config, during
# "make menuconfig" select the STM32F103 with a "28KiB bootloader" and
# serial (on USART1 PA10/PA9) communication.

# It should be noted that newer variations of this printer shipping in
# 2022 may have GD32F103 chips installed and not STM32F103. You may
# have to inspect the mainboard to ascertain which one you have. If it
# is the GD32F103 then please select Disable SWD at startup in the
# "make menuconfig" along with the same settings for STM32F103.

# Flash this firmware by copying "out/klipper.bin" to a SD card and
# turning on the printer with the card inserted. The firmware
# filename must end in ".bin" and must not match the last filename
# that was flashed.

# See docs/Config_Reference.md for a description of parameters.

last valve Aug 30, 2024, 2:09 PM

#

Hmm

tranquil sandal Aug 30, 2024, 2:09 PM

#

follow the directions of that

#

check your printer board if its a gd32 or an stm

last valve Aug 30, 2024, 2:10 PM

#

Im in klipper menu

last valve Aug 30, 2024, 2:10 PM

#

tranquil sandal check your printer board if its a gd32 or an stm

How do I do that?

tranquil sandal Aug 30, 2024, 2:10 PM

#

opening the printer motherboard

#

then looking at this chip

last valve Aug 30, 2024, 2:11 PM

#

tranquil sandal opening the printer motherboard

is it the thing at the sd card reader?

#

or is it at the lcd screen

tranquil sandal Aug 30, 2024, 2:12 PM

#

#

my internet is pretty crappy oof

#

apartment wifi sucks

last valve Aug 30, 2024, 2:12 PM

#

rip

tranquil sandal Aug 30, 2024, 2:12 PM

#

but that image is correct

#

read if it says STM32 or GD32

#

the motherboard is located near the Y axis 4040 extrusion, the one where you connect the usb

tranquil sandal Aug 30, 2024, 2:14 PM

#

tranquil sandal ``` # This file contains pin mappings for the stock 2020 Creality Ender 3 # Pro ...

then follow this guide depending on your chip

last valve Aug 30, 2024, 2:15 PM

#

shit

#

Can't unscrew it

#

One of them is stripped for some reason

tranquil sandal Aug 30, 2024, 2:18 PM

#

lmao

#

bruh

#

your hex is chinesium

last valve Aug 30, 2024, 2:18 PM

#

g32f

#

I managed to peel one side back a bit

#

and shine a torch inside

tranquil sandal Aug 30, 2024, 2:19 PM

#

tranquil sandal ``` # This file contains pin mappings for the stock 2020 Creality Ender 3 # Pro ...

follow this

#

Just look around the settings to find the stm32f103 and disable swd

#

on the bootloader offset, set it to 28kb

last valve Aug 30, 2024, 2:21 PM

#

back

#

re-screwed it in

#

So what exactly do I do

#

?

#

Plug in a sd card reader via usb and do 'out/klipper.bin'?

tranquil sandal Aug 30, 2024, 2:22 PM

#

bruh read up first

#

that would be for later

#

you still need to set up klipper firmware setting

last valve Aug 30, 2024, 2:23 PM

#

I download raw file?

last valve Aug 30, 2024, 2:24 PM

#

tranquil sandal you still need to set up klipper firmware setting

Alr

#

What do I set for micro-controller and processor model?

tranquil sandal Aug 30, 2024, 2:25 PM

#

tranquil sandal Just look around the settings to find the stm32f103 and disable swd

literally

#

STM32F103

#

Then disable SWD on additional options

last valve Aug 30, 2024, 2:26 PM

#

I set it as STM32

#

I don't see any additional options

tranquil sandal Aug 30, 2024, 2:27 PM

#

look around until you find disable SWD

last valve Aug 30, 2024, 2:28 PM

#

Foudn it

#

Had to enable extra low level config options

#

ok done, what now?

tranquil sandal Aug 30, 2024, 2:30 PM

#

Now save and exit

#

the instructions on how is in the bottom

last valve Aug 30, 2024, 2:30 PM

#

there's baud rate, clock reference...

tranquil sandal Aug 30, 2024, 2:30 PM

#

afaik you can leave that default

#

if it doesn't work, then we'll have to set up baud rate to 115200

last valve Aug 30, 2024, 2:31 PM

#

Alright

tranquil sandal Aug 30, 2024, 2:31 PM

#

v4.2.2 boards only communicate at that baud rate for some reason

#

but Auto is fine if there is an auto

last valve Aug 30, 2024, 2:32 PM

#

my sd card is cleared and ready

tranquil sandal Aug 30, 2024, 2:32 PM

#

Okay now save and exit

last valve Aug 30, 2024, 2:32 PM

#

Already did

tranquil sandal Aug 30, 2024, 2:32 PM

#

then command make

last valve Aug 30, 2024, 2:32 PM

#

It's compiling stuff

tranquil sandal Aug 30, 2024, 2:32 PM

#

wait for it to finish

last valve Aug 30, 2024, 2:33 PM

#

It's done

tranquil sandal Aug 30, 2024, 2:33 PM

#

now ls ./out/klipper.bin

#

does it list it?

last valve Aug 30, 2024, 2:33 PM

#

yes, it green

tranquil sandal Aug 30, 2024, 2:34 PM

#

Good, now do sudo echo 1

last valve Aug 30, 2024, 2:34 PM

#

it listed '1'

tranquil sandal Aug 30, 2024, 2:34 PM

#

then watch -x sudo blkid

last valve Aug 30, 2024, 2:34 PM

#

uhh it just

#

4l ines

tranquil sandal Aug 30, 2024, 2:35 PM

#

It lists something like /dev/sda1 right?

last valve Aug 30, 2024, 2:35 PM

#

ye

tranquil sandal Aug 30, 2024, 2:35 PM

#

then some random thingy

#

okay what I want you to do is watch the output change and find the name of the device that got inserted when you plug in the sd card

#

is that okay?

last valve Aug 30, 2024, 2:36 PM

#

so ip lug it in and see what changes?

tranquil sandal Aug 30, 2024, 2:36 PM

#

yep

last valve Aug 30, 2024, 2:36 PM

#

Ok an extra line appeared

tranquil sandal Aug 30, 2024, 2:36 PM

#

what's the /dev/something name of it?

#

unplug and replug to be sure

last valve Aug 30, 2024, 2:37 PM

#

/dev/sda:1 LABEL=''Devian 12_6''

#

It's defo it

tranquil sandal Aug 30, 2024, 2:37 PM

#

wait you sure its /dev/sda?

last valve Aug 30, 2024, 2:37 PM

#

ye

tranquil sandal Aug 30, 2024, 2:37 PM

#

what's the other /dev/sd letters

last valve Aug 30, 2024, 2:37 PM

#

When I unplug, it dissapears

tranquil sandal Aug 30, 2024, 2:38 PM

#

can you list them

last valve Aug 30, 2024, 2:38 PM

#

Wdym other letters

tranquil sandal Aug 30, 2024, 2:38 PM

#

the other thingies

#

other than that

last valve Aug 30, 2024, 2:38 PM

#

On same line?

tranquil sandal Aug 30, 2024, 2:38 PM

#

just the /dev/<name> part

#

no

last valve Aug 30, 2024, 2:38 PM

#

Ah ok

tranquil sandal Aug 30, 2024, 2:38 PM

#

all the lines

last valve Aug 30, 2024, 2:39 PM

#

Theres /dev/mmcb1k2p(1 till 3):

tranquil sandal Aug 30, 2024, 2:39 PM

#

how the fuck is your system not installed in sda1

last valve Aug 30, 2024, 2:39 PM

#

Chinese magic ig

tranquil sandal Aug 30, 2024, 2:39 PM

#

oh that's probably where it is installed lmao

#

here's the pain

#

do you want to format this via the terminal or can you just plug it in to your phone to repartition this

#

or do you have another laptop so you can format this to f32

last valve Aug 30, 2024, 2:40 PM

#

I have my main computer

tranquil sandal Aug 30, 2024, 2:40 PM

#

yeah plug it in there first, then format it to fat32

last valve Aug 30, 2024, 2:40 PM

#

'create and format disk partitions'

tranquil sandal Aug 30, 2024, 2:40 PM

#

yep

#

as much as I would like you to partition off of the command line

#

its fucking pain

last valve Aug 30, 2024, 2:41 PM

#

Irt's already fat32

tranquil sandal Aug 30, 2024, 2:41 PM

#

are you sure?

last valve Aug 30, 2024, 2:41 PM

#

yep

tranquil sandal Aug 30, 2024, 2:41 PM

#

you used that to install debian

last valve Aug 30, 2024, 2:41 PM

#

tranquil sandal you used that to install debian

ye

#

I cleared it

tranquil sandal Aug 30, 2024, 2:41 PM

#

okay then that actually makes things easier

#

go plug it back in to the laptop

last valve Aug 30, 2024, 2:42 PM

#

ye

tranquil sandal Aug 30, 2024, 2:42 PM

#

check if its still /dev/sda

last valve Aug 30, 2024, 2:42 PM

#

Still /dev/sda1

tranquil sandal Aug 30, 2024, 2:42 PM

#

now exit that by ctrl +c

#

then do sudo mount /dev/sda1 /mnt

last valve Aug 30, 2024, 2:43 PM

#

I typed that in, pressed enter, it went to newl ine

#

So I don't know if it did anything

tranquil sandal Aug 30, 2024, 2:44 PM

#

you hit \

#

just enter and you'll be fine

#

you can repeat it again just to be sure

last valve Aug 30, 2024, 2:45 PM

#

yep

#

It's mounted

#

This now? 'out/klipper.bin'

tranquil sandal Aug 30, 2024, 2:46 PM

#

now do cp ~/newklippy/klipper/out/klipper.bin /mnt/

last valve Aug 30, 2024, 2:47 PM

#

permission denie

tranquil sandal Aug 30, 2024, 2:48 PM

#

go add sudo on the front

last valve Aug 30, 2024, 2:48 PM

#

Just did

#

worked

tranquil sandal Aug 30, 2024, 2:48 PM

#

add sudo

#

then sudo umount /mnt

last valve Aug 30, 2024, 2:49 PM

#

sudo unmount command not found

tranquil sandal Aug 30, 2024, 2:49 PM

#

my internet is abysmally slow btw, you're gonna have a hard time lmao

last valve Aug 30, 2024, 2:49 PM

#

:c

tranquil sandal Aug 30, 2024, 2:49 PM

#

Not unmount, U mount (umount)

last valve Aug 30, 2024, 2:50 PM

#

DOne

tranquil sandal Aug 30, 2024, 2:50 PM

#

put it now on the printer

last valve Aug 30, 2024, 2:50 PM

#

Ok, one moment

tranquil sandal Aug 30, 2024, 2:52 PM

#

once you do that, plug it in to the laptop, go to the web ui(mainsail) then firmware restart

last valve Aug 30, 2024, 2:52 PM

#

Ok

#

sd init fail, it says

tranquil sandal Aug 30, 2024, 2:52 PM

#

restart the printer

#

I'm bailing out, the rx of this network sucks ass

last valve Aug 30, 2024, 2:53 PM

#

:c

tranquil sandal Aug 30, 2024, 2:53 PM

#

bruh restart the printer

#

Restart by unplugging usb and turning off power

last valve Aug 30, 2024, 2:53 PM

#

last valve Aug 30, 2024, 2:53 PM

#

tranquil sandal Restart by unplugging usb and turning off power

Thats what I did

tranquil sandal Aug 30, 2024, 2:53 PM

#

then turn it back on

tranquil sandal Aug 30, 2024, 2:54 PM

#

tranquil sandal once you do that, plug it in to the laptop, go to the web ui(mainsail) then firm...

then do this

last valve Aug 30, 2024, 2:54 PM

#

What mainsail ui?

tranquil sandal Aug 30, 2024, 2:54 PM

#

did you plug in the printer?

last valve Aug 30, 2024, 2:55 PM

#

yes

#

It's pwoered on, usb plugged in, sd card is in

#

SD init fail

last valve Aug 30, 2024, 2:57 PM

#

tranquil sandal if it doesn't work, then we'll have to set up baud rate to 115200

This, maybe?

tranquil sandal Aug 30, 2024, 2:57 PM

#

it shouldn't be on marlin

#

rename the klipper.bin in your computer to firmware.bin

#

then reboot your printer

last valve Aug 30, 2024, 2:59 PM

#

sd init fail

tranquil sandal Aug 30, 2024, 3:00 PM

#

do you have two .bin files on your sd card

last valve Aug 30, 2024, 3:00 PM

#

Just one

#

named 'firmware.bin'

tranquil sandal Aug 30, 2024, 3:00 PM

#

delete that

#

recompile klipper

#

then do the copy again

last valve Aug 30, 2024, 3:01 PM

#

Ming guiding me again?

tranquil sandal Aug 30, 2024, 3:01 PM

#

please fully turn off your printer too, idk if you turn it off only with psu

#

it should honestly just go boot to klipper immediately once usb and psu power is removed

last valve Aug 30, 2024, 3:02 PM

#

tranquil sandal it should honestly just go boot to klipper immediately once usb and psu power is...

Did that, didn't boot

#

to it

tranquil sandal Aug 30, 2024, 3:03 PM

#

recompile klipper again

last valve Aug 30, 2024, 3:03 PM

#

tranquil sandal recompile klipper again

remind me, how to do that?

tranquil sandal Aug 30, 2024, 3:03 PM

#

do the same steps discussed above

last valve Aug 30, 2024, 3:05 PM

#

What baud rate?

#

Should we try and change it?

#

to 115200

tranquil sandal Aug 30, 2024, 3:05 PM

#

yeah

last valve Aug 30, 2024, 3:06 PM

#

alr

#

done

tranquil sandal Aug 30, 2024, 3:06 PM

#

so long as its compiled and moved to sd card

#

when you do umount, wait until user@user appeara again

#

Then unplug

last valve Aug 30, 2024, 3:08 PM

#

Done

#

so I just start the printer with sds card and usb?

tranquil sandal Aug 30, 2024, 3:08 PM

#

do the same thing again reflashing the ender 3 pro by plugging it in

#

yep

#

plug SD first

#

before USB

last valve Aug 30, 2024, 3:10 PM

#

wait, do we need the config file though

#

From the link

tranquil sandal Aug 30, 2024, 3:10 PM

#

yes

#

just wait

last valve Aug 30, 2024, 3:10 PM

#

sd init fail

tranquil sandal Aug 30, 2024, 3:11 PM

#

lol rip

last valve Aug 30, 2024, 3:11 PM

#

What happens now?

tranquil sandal Aug 30, 2024, 3:11 PM

#

that's literally how I flashed my v4.2.2

#

so.. idk what you doing wrong

last valve Aug 30, 2024, 3:12 PM

#

it it worth pointing out

#

the bin file is 0kb

tranquil sandal Aug 30, 2024, 3:12 PM

#

yes

#

did you read the output of the compile?

last valve Aug 30, 2024, 3:13 PM

#

nvm it's 32kb now

last valve Aug 30, 2024, 3:13 PM

#

tranquil sandal did you read the output of the compile?

not yet

#

📎 klipper.bin

#

Here it is

tranquil sandal Aug 30, 2024, 3:13 PM

#

just wait I'll make my own

last valve Aug 30, 2024, 3:13 PM

#

Looks like gibberish to me ngl

tranquil sandal Aug 30, 2024, 3:16 PM

#

put this to your sd card

#

📎 klipper.bin

last valve Aug 30, 2024, 3:16 PM

#

alr

undone bane Aug 30, 2024, 3:16 PM

#

heya how’s it going

tranquil sandal Aug 30, 2024, 3:16 PM

#

bro can't flash firmware to ender 3 pro

undone bane Aug 30, 2024, 3:16 PM

#

damn

tranquil sandal Aug 30, 2024, 3:17 PM

#

stuck at sd card init fail which is marlin

last valve Aug 30, 2024, 3:17 PM

#

sd init fail

#

innit

tranquil sandal Aug 30, 2024, 3:17 PM

#

I'm betting he plugs in the USB first before the SD card

#

and that causes the board to turn on

last valve Aug 30, 2024, 3:17 PM

#

tranquil sandal I'm betting he plugs in the USB first before the SD card

Absolutely not

undone bane Aug 30, 2024, 3:17 PM

#

can you wipe the board to remove the marlin?

tranquil sandal Aug 30, 2024, 3:17 PM

#

you can do that only by sd card

#

also rename that firmware.bin

undone bane Aug 30, 2024, 3:17 PM

#

ah lol

tranquil sandal Aug 30, 2024, 3:17 PM

#

to something gibberish like firmware-waegu2buo2b.bin

cerulean meteor Aug 30, 2024, 3:18 PM

#

Is it possible that 64gb is too big?

tranquil sandal Aug 30, 2024, 3:18 PM

#

maybe the previous flash is just named firmware.bin, so it doesn't recognize it

#

that's also possible

undone bane Aug 30, 2024, 3:18 PM

#

cerulean meteor Is it possible that 64gb is too big?

could be tbh

last valve Aug 30, 2024, 3:18 PM

#

cerulean meteor Is it possible that 64gb is too big?

How does he know

#

How big it is

cerulean meteor Aug 30, 2024, 3:18 PM

#

Because u shared screenshot

tranquil sandal Aug 30, 2024, 3:18 PM

#

you said it like really really earlier

last valve Aug 30, 2024, 3:18 PM

#

lemme try do a transplant onto my 8gb one

cerulean meteor Aug 30, 2024, 3:19 PM

#

last valve

This one specifically

last valve Aug 30, 2024, 3:19 PM

#

fair enough

#

Right

#

So I put sd card in

#

With usb unplugged

#

Turn on the printer

tranquil sandal Aug 30, 2024, 3:20 PM

#

if its blank, its good

last valve Aug 30, 2024, 3:20 PM

#

Then plug it in

tranquil sandal Aug 30, 2024, 3:20 PM

#

if the LCD is blank, its good

last valve Aug 30, 2024, 3:20 PM

#

wdym

tranquil sandal Aug 30, 2024, 3:21 PM

#

no display

last valve Aug 30, 2024, 3:21 PM

#

I plugged sd card in

tranquil sandal Aug 30, 2024, 3:21 PM

#

no text, no nothing

last valve Aug 30, 2024, 3:21 PM

#

Do I turn it on?

tranquil sandal Aug 30, 2024, 3:21 PM

#

yes

last valve Aug 30, 2024, 3:22 PM

#

yes!

#

Blank blue screeen!

tranquil sandal Aug 30, 2024, 3:22 PM

#

good

last valve Aug 30, 2024, 3:22 PM

#

plugging in usb now!

tranquil sandal Aug 30, 2024, 3:22 PM

#

don't yet

#

go back to your laptop

last valve Aug 30, 2024, 3:22 PM

#

ok

tranquil sandal Aug 30, 2024, 3:22 PM

#

then type this

#

wget https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3pro-2020.cfg```

last valve Aug 30, 2024, 3:23 PM

#

done

tranquil sandal Aug 30, 2024, 3:23 PM

#

can you replace cfg on mainsail @undone bane

last valve Aug 30, 2024, 3:24 PM

#

He's busy playing a tycoon

cerulean meteor Aug 30, 2024, 3:24 PM

#

tranquil sandal can you replace cfg on mainsail <@537050499413966858>

Yes

#

Just delete the old file and replace it with the new file

tranquil sandal Aug 30, 2024, 3:24 PM

#

yeah teach this man

last valve Aug 30, 2024, 3:25 PM

#

https://tenor.com/view/mr-bean-thumbs-up-gif-8046994222709260937

Tenor

tranquil sandal Aug 30, 2024, 3:25 PM

#

https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3pro-2020.cfg

GitHub

klipper/config/printer-creality-ender3pro-2020.cfg at master · Klip...

Klipper is a 3d-printer firmware. Contribute to Klipper3d/klipper development by creating an account on GitHub.

#

download this config on your main pc

last valve Aug 30, 2024, 3:26 PM

#

DOne

tranquil sandal Aug 30, 2024, 3:26 PM

#

then upload it to mainsail

#

last valve Aug 30, 2024, 3:27 PM

#

#

done

tranquil sandal Aug 30, 2024, 3:27 PM

#

now delete printer.cfg

#

then rename that uploaded file to "printer.cfg"

last valve Aug 30, 2024, 3:28 PM

#

How to rename?

tranquil sandal Aug 30, 2024, 3:28 PM

#

right click

last valve Aug 30, 2024, 3:29 PM

#

Done

tranquil sandal Aug 30, 2024, 3:29 PM

#

connect the printer and firmware restart

last valve Aug 30, 2024, 3:30 PM

#

printer is not ready....

cerulean meteor Aug 30, 2024, 3:30 PM

#

He has to rename the path first no? Or already done that?

tranquil sandal Aug 30, 2024, 3:30 PM

#

oh yeah forgor

last valve Aug 30, 2024, 3:30 PM

#

bruh

tranquil sandal Aug 30, 2024, 3:30 PM

#

on the laptop, do ls /dev/serial/by-id

#

the device name there is your printer

last valve Aug 30, 2024, 3:31 PM

#

whilep lugged in to printer or?

tranquil sandal Aug 30, 2024, 3:31 PM

#

while plugged in

cerulean meteor Aug 30, 2024, 3:31 PM

#

Yes

last valve Aug 30, 2024, 3:31 PM

#

Idk the serial of my printer though

tranquil sandal Aug 30, 2024, 3:31 PM

#

bruh

tranquil sandal Aug 30, 2024, 3:31 PM

#

tranquil sandal on the laptop, do ``ls /dev/serial/by-id``

this

#

do this

last valve Aug 30, 2024, 3:31 PM

#

nvm im dumb

#

Got a blue line of stuff

tranquil sandal Aug 30, 2024, 3:32 PM

#

that's your printer

#

/dev/serial/by-id/<what appeared there>

#

list it here so you can take a note on what to put on printer.cfg later

last valve Aug 30, 2024, 3:32 PM

#

/dev/serial/by-id/usb-1a86_USB_serial-if00-port0

tranquil sandal Aug 30, 2024, 3:33 PM

#

okay good

#

now go to mainsail and click the printer.cfg

#

find the part that says

serial: /dev/serial/blabhba```
replace the serial with that

last valve Aug 30, 2024, 3:33 PM

#

ZIs?

tranquil sandal Aug 30, 2024, 3:33 PM

#

yep

#

though in that case, the default printer.cfg for the ender 3 pro actually knows the name lmao

last valve Aug 30, 2024, 3:34 PM

#

is this bad?

tranquil sandal Aug 30, 2024, 3:34 PM

#

now you can firmware restart

last valve Aug 30, 2024, 3:34 PM

#

ok

#

Printer is not ready

#

Need the logs?

tranquil sandal Aug 30, 2024, 3:35 PM

#

if it fails, download the klipper log and read what's on the end

#

yep

#

wait for it to error out

last valve Aug 30, 2024, 3:36 PM

#

Hm?

last valve Aug 30, 2024, 3:36 PM

#

tranquil sandal if it fails, download the klipper log and read what's on the end

On the end

#

serialhdl.error: mcu 'mcu': Serial connection closed

tranquil sandal Aug 30, 2024, 3:36 PM

#

hmm...

#

I actually don't know what that is

#

but at least the MCU responds

last valve Aug 30, 2024, 3:37 PM

#

Are we fucked

#

?

tranquil sandal Aug 30, 2024, 3:37 PM

#

can you by chance restart again

last valve Aug 30, 2024, 3:37 PM

#

ok

#

Restart firmware?

tranquil sandal Aug 30, 2024, 3:37 PM

#

fw restart

last valve Aug 30, 2024, 3:37 PM

#

Or the entire procedure?

tranquil sandal Aug 30, 2024, 3:37 PM

#

and then give me the logs

#

at least someone can actually read the logs and know what it is

last valve Aug 30, 2024, 3:38 PM

#

📎 moonraker.log 📎 klippy_2.log

cerulean meteor Aug 30, 2024, 3:38 PM

#

Did he cover the power on the USB cable?

last valve Aug 30, 2024, 3:39 PM

#

cerulean meteor Did he cover the power on the USB cable?

That makes a difference wether it's info or power only?

cerulean meteor Aug 30, 2024, 3:39 PM

#

On some printer, if the power lines are not covered, it can behave weirdly

tranquil sandal Aug 30, 2024, 3:39 PM

#

err... if you look at the error log

#

/dev/serial/by-id/<your-mcu-id>

#

lmao

last valve Aug 30, 2024, 3:40 PM

#

zpinks

cerulean meteor Aug 30, 2024, 3:40 PM

#

Bruh

tranquil sandal Aug 30, 2024, 3:40 PM

#

blud did not save

cerulean meteor Aug 30, 2024, 3:40 PM

#

Did u save?

last valve Aug 30, 2024, 3:40 PM

#

My pronouns live up to their name

last valve Aug 30, 2024, 3:41 PM

#

tranquil sandal ```/dev/serial/by-id/<your-mcu-id>```

So what do I do?

tranquil sandal Aug 30, 2024, 3:41 PM

#

💀

#

printer.cfg

#

change the mcu to the given path

cerulean meteor Aug 30, 2024, 3:42 PM

#

Then save it

last valve Aug 30, 2024, 3:42 PM

#

tranquil sandal Aug 30, 2024, 3:42 PM

#

and CHECK if there's another [mcu] entry

last valve Aug 30, 2024, 3:42 PM

#

but it's that by deafult

tranquil sandal Aug 30, 2024, 3:42 PM

#

find if there's another mcu entry at the end

cerulean meteor Aug 30, 2024, 3:43 PM

#

Can use Ctrl + f to search

tranquil sandal Aug 30, 2024, 3:43 PM

#

it could be there's two and that is getting overriden by the last mcu entry

last valve Aug 30, 2024, 3:43 PM

#

tranquil sandal Aug 30, 2024, 3:43 PM

#

cerulean meteor Can use Ctrl + f to search

this

last valve Aug 30, 2024, 3:43 PM

#

only 1

cerulean meteor Aug 30, 2024, 3:43 PM

#

U know what, just send the whole printer.cfg file lmao

tranquil sandal Aug 30, 2024, 3:43 PM

#

cerulean meteor U know what, just send the whole printer.cfg file lmao

its literally this

#

https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3pro-2020.cfg

GitHub

klipper/config/printer-creality-ender3pro-2020.cfg at master · Klip...

Klipper is a 3d-printer firmware. Contribute to Klipper3d/klipper development by creating an account on GitHub.

cerulean meteor Aug 30, 2024, 3:44 PM

#

Huh, then is it an old log?

last valve Aug 30, 2024, 3:44 PM

#

📎 printer.cfg

tranquil sandal Aug 30, 2024, 3:44 PM

#

could be tbh

#

he's so close to klipper lmao

last valve Aug 30, 2024, 3:44 PM

#

tranquil sandal he's so close to klipper lmao

fr 😭

tranquil sandal Aug 30, 2024, 3:45 PM

#

ya'll getting edged

last valve Aug 30, 2024, 3:45 PM

#

tranquil sandal ya'll getting edged

the fuck

tranquil sandal Aug 30, 2024, 3:45 PM

#

you don't know its also used that way?

#

so close yet so far

cerulean meteor Aug 30, 2024, 3:46 PM

#

tranquil sandal could be tbh

Which part of the log did u read? The ones at the end show the path is configured correctly

tranquil sandal Aug 30, 2024, 3:47 PM

#

cerulean meteor Which part of the log did u read? The ones at the end show the path is configure...

klippy(2).log

#

at the Could Not Open /dev/serial/by-id/<your-mcu-name-here> lmaoooo

cerulean meteor Aug 30, 2024, 3:48 PM

#

tranquil sandal Aug 30, 2024, 3:48 PM

#

also it seems its reading the old config

#

look at this

last valve Aug 30, 2024, 3:48 PM

#

Should I turn printer off, take out the sd card, then do it all again?

tranquil sandal Aug 30, 2024, 3:48 PM

#

#

nah

#

its on the laptop side now

cerulean meteor Aug 30, 2024, 3:49 PM

#

tranquil sandal

Nah, check when that was done

#

The timestamp

#

Go to the end of the log, that's where you will see the most recent errors

tranquil sandal Aug 30, 2024, 3:50 PM

#

@last valve go to your laptop and do sudo nano /home/eldar/printer_data/config/printer.cfg

#

its reading the printer.cfg from there

last valve Aug 30, 2024, 3:51 PM

#

Ok I'm in

tranquil sandal Aug 30, 2024, 3:51 PM

#

screenie

last valve Aug 30, 2024, 3:51 PM

#

MCU reads same thing

tranquil sandal Aug 30, 2024, 3:52 PM

#

maybe you have to restart klipper

last valve Aug 30, 2024, 3:52 PM

#

rn_image_picker_lib_temp_3338f7e2-28a5-4af6-870c-f224e4c4a27e.jpg

tranquil sandal Aug 30, 2024, 3:52 PM

#

restart your computer

last valve Aug 30, 2024, 3:52 PM

#

tranquil sandal restart your computer

Main?

tranquil sandal Aug 30, 2024, 3:52 PM

#

no

last valve Aug 30, 2024, 3:52 PM

#

Ok laptop then

tranquil sandal Aug 30, 2024, 3:52 PM

#

the klipper laptop

#

its just the easiest way to get klipper to restart sometimes

last valve Aug 30, 2024, 3:53 PM

#

ok, laptop is on cooldown

#

it's re-booting

#

Ok it's up

#

Firmware restart?

tranquil sandal Aug 30, 2024, 3:55 PM

#

yuh

last valve Aug 30, 2024, 3:55 PM

#

THe printer ain't ready

tranquil sandal Aug 30, 2024, 3:55 PM

#

send the new logs too

#

if it errors out

last valve Aug 30, 2024, 3:55 PM

#

📎 moonraker_1.log 📎 klippy_3.log

tranquil sandal Aug 30, 2024, 3:56 PM

#

ha?

last valve Aug 30, 2024, 3:56 PM

#

tranquil sandal ha?

ha, ha, ha

#

Stayin alive

tranquil sandal Aug 30, 2024, 3:56 PM

#

it still reports klipper is still using the old config file

last valve Aug 30, 2024, 3:56 PM

#

stayin alaive

#

What the fuck is going on?

cerulean meteor Aug 30, 2024, 3:57 PM

#

tranquil sandal it still reports klipper is still using the old config file

How did you come to that conclusion? The <your-path> thing?

tranquil sandal Aug 30, 2024, 3:57 PM

#

the cfg isn't as long

#

cfg literally looks like this

#

===== Config file =====
[mcu]
serial = /dev/serial/by-id/<your-mcu-id>

[virtual_sdcard]
path = /home/eldar/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[printer]
kinematics = none
max_velocity = 1000
max_accel = 1000

#

what?!

cerulean meteor Aug 30, 2024, 3:58 PM

#

Ur reading old logs!!

tranquil sandal Aug 30, 2024, 3:58 PM

#

its not old logs

last valve Aug 30, 2024, 3:58 PM

#

cerulean meteor Ur reading old logs!!

They're new tho

cerulean meteor Aug 30, 2024, 3:58 PM

#

tranquil sandal its not old logs

last valve Aug 30, 2024, 3:59 PM

#

cerulean meteor

Tiem stamp reads 4 min ago

tranquil sandal Aug 30, 2024, 3:59 PM

#

okay wtf discord

#

why go to the first

cerulean meteor Aug 30, 2024, 3:59 PM

#

last valve They're new tho

Yes I know, but it stores log from even months ago if it's not deleted

#

So you have to go to the bottom of the file to see the most recent logs

tranquil sandal Aug 30, 2024, 4:00 PM

#

timed out :thonker:

#

lemme redo a firmware compile

last valve Aug 30, 2024, 4:00 PM

#

tranquil sandal lemme redo a firmware compile

Will I have to take sd card out?

cerulean meteor Aug 30, 2024, 4:01 PM

#

Wait u still have it in? Try plugging it out

last valve Aug 30, 2024, 4:01 PM

#

plugged ito ut

#

Restrated firmware, nothing

tranquil sandal Aug 30, 2024, 4:02 PM

#

cerulean meteor Wait u still have it in? Try plugging it out

its a firmware issue

cerulean meteor Aug 30, 2024, 4:02 PM

#

last valve Restrated firmware, nothing

You mean same error?

tranquil sandal Aug 30, 2024, 4:02 PM

#

its timing out, that means its usually the firmware

last valve Aug 30, 2024, 4:02 PM

#

NEw logs

📎 moonraker.log 📎 klippy.log

tranquil sandal Aug 30, 2024, 4:02 PM

#

I've seen this issue on my v4.2.2 when baud rate not set to 115200

last valve Aug 30, 2024, 4:02 PM

#

tranquil sandal I've seen this issue on my v4.2.2 when baud rate not set to 115200

In your firmware file

#

What did you set it to?

tranquil sandal Aug 30, 2024, 4:03 PM

#

go to printer.cfg

#

then under [mcu] add baud:115200

last valve Aug 30, 2024, 4:04 PM

#

ok

#

#

?

#

Like this?

tranquil sandal Aug 30, 2024, 4:05 PM

#

sure

last valve Aug 30, 2024, 4:06 PM

#

printer not ready

#

Same error

tranquil sandal Aug 30, 2024, 4:06 PM

#

def firmware issue then

last valve Aug 30, 2024, 4:06 PM

#

📎 moonraker.log 📎 klippy.log

#

New logs

last valve Aug 30, 2024, 4:07 PM

#

tranquil sandal def firmware issue then

So.. what we gon do?

tranquil sandal Aug 30, 2024, 4:09 PM

#

try this one

📎 klipper.bin

last valve Aug 30, 2024, 4:09 PM

#

ok, one sec

#

doI turn off the printer

#

?

#

I'll re-start the printer

#

ok it worked

#

#

Why is it so much faster to home now?

#

Yay it worky

#

So, what happens now, @tranquil sandal ?

tranquil sandal Aug 30, 2024, 4:13 PM

#

you're pretty much in

#

you'll still need to do config changes since you still have warnings, but it should be easy from there on

last valve Aug 30, 2024, 4:14 PM

#

Alr, may you help me with those?

tranquil sandal Aug 30, 2024, 4:14 PM

#

ask 1 mon for these

last valve Aug 30, 2024, 4:14 PM

#

ok

#

@undone bane Kindly get off of that tycoon on roblox and please help

#

:>

tranquil sandal Aug 30, 2024, 4:14 PM

#

I dont really use these features

undone bane Aug 30, 2024, 4:15 PM

#

bro

last valve Aug 30, 2024, 4:16 PM

#

Yes, tycoon rng

undone bane Aug 30, 2024, 4:16 PM

#

what’s the issue

last valve Aug 30, 2024, 4:16 PM

#

Now kindly, please help me fix thsese:

undone bane Aug 30, 2024, 4:16 PM

#

uhhh

#

configure those

last valve Aug 30, 2024, 4:17 PM

#

Where and how?

undone bane Aug 30, 2024, 4:17 PM

#

printer.cfg i think

last valve Aug 30, 2024, 4:18 PM

#

Can't find neither of them

undone bane Aug 30, 2024, 4:18 PM

#

you need to add them

last valve Aug 30, 2024, 4:19 PM

#

undone bane you need to add them

Mind assisting me?

#

Like where and how?

undone bane Aug 30, 2024, 4:19 PM

#

add them in printer.cfg

#

look where the other macros are

last valve Aug 30, 2024, 4:19 PM

#

undone bane look where the other macros are

I don't see any

#

What is itl isted as?

#

As in [?]

undone bane Aug 30, 2024, 4:21 PM

#

lemme see

#

there should be a gcode macro file

last valve Aug 30, 2024, 4:27 PM

#

In what format?

#

it stopped working

#

All I did was change the cable :/

#

why is it so picky with the cable

#

Picky little shit wants the ore expensive long cable than the identicle short one

tranquil sandal Aug 30, 2024, 4:33 PM

#

its because some cables are power only

last valve Aug 30, 2024, 4:34 PM

#

tranquil sandal its because some cables are power only

Fair enough

#

Imma send a pic of my setup

#

rn_image_picker_lib_temp_c5b38d5c-1d20-47dc-9450-7ba34e84557a.jpg

#

just need a light strip and it'll be good

#

:D

#

rn_image_picker_lib_temp_aca93776-0221-424c-8675-730e3297c85b.jpg

last valve Aug 30, 2024, 5:50 PM

#

Cosy :>

undone bane Aug 30, 2024, 5:51 PM

#

what did u want to show me

last valve Aug 30, 2024, 6:09 PM

#

undone bane what did u want to show me

My setup

#

In the images above

undone bane Aug 30, 2024, 6:12 PM

#

looks good

#

printing yet?

last valve Aug 30, 2024, 6:45 PM

#

undone bane printing yet?

New heatbreak arrives only 5th-10th of september

#

COULD arrive earlier

#

If I get lucky

#Upgrading wnder 3 pro to klipper