#Beginner who knows nothing

1 messages · Page 1 of 1 (latest)

fallen viperBOT
#
AI Help

Hello! How can I assist you with 3D printing today?

WARNING: This response is AI generated and may contain errors.
abstract nymph
#

Yo

vernal bane
#

Hello

abstract nymph
#

Handle this stuff first, before you get into any tuning or setup

#

Is it still on the frame or did you like remove it entirely?

vernal bane
#

They’re sending me this

IMG_9458.png
vernal bane
abstract nymph
#

Its not broken though, its entirely usable still, pretty much perfect condition

#

You should reattach it and plug it in, then heat up the nozzle to begin taking the filament off

vernal bane
#

Also, my filament sensor doesn’t work

abstract nymph
#

fr? It doesnt stop prints when running out?

vernal bane
#

It doesn’t turn on or make that clicking sound

abstract nymph
#

Tbh idk how the filament sensor functions, the regular sv06 doesnt come with it, but all of your extruder can be fixed at least

quiet stirrup
#

Start with trying or print a benchy

#

And see how it goes just to get it printing

vernal bane
#

What about those lines on my build plate?

void shuttle
abstract nymph
#

Shouldnt he remove the filament clogup first? It might be messing up the z offset

abstract nymph
quiet stirrup
quiet stirrup
vernal bane
#

Additionally, when I was trying to follow the steps Sovol provided, the fan in the motherboard is messed up

abstract nymph
#

? How

vernal bane
#

Well I messed it up by taking the wrong screws out

#

And the screws have to align with the fan

#

I should probably fix that first

void shuttle
#

make a list of everything broken with it, and tackle it 1 by 1

vernal bane
#
  1. The fan in motherboard is not aligned properly, so I can’t put screws in
  2. Filament sensor doesn’t work
  3. The nozzle seems to be clogged
  4. Lines on the build plate (can’t really fix that though)
void shuttle
#

okay first fix the fan on the motherboard, then nozzle

#

also what lines on build plate? can i see

abstract nymph
#

Its like a tiny scratch, lol

vernal bane
void shuttle
#

youre fiineee

abstract nymph
#

Yeah, those wont really affect your printing at all

void shuttle
#

i have worse scratch and even some tiny holes on my plate

vernal bane
#

Won’t the filament be melted In those cracks?

abstract nymph
#

Just gotta be sure to relevel before starting anything print related after these fixes

void shuttle
abstract nymph
vernal bane
#

I will be doing this when I get home from work. Hopefully you guys will still be around.

fallen viperBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

vernal bane
#

Hello

#

I’m home after a long day

#

@void shuttle @abstract nymph @quiet stirrup

#

Didn’t know it if I should ping yall

fallen viperBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

void shuttle
#

@vernal bane you still there?

fallen viperBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

quiet stirrup
fallen viperBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

vernal bane
#

But anyway, I was trying to fix number 1

#

And the screwdriver provided with the printer was damaging the screws

void shuttle
#

what kind of screw it is? and which screwdriver did you use

vernal bane
#

The screwdriver that came with the printer, and for the screws I’d have to check when I get home.