Still problems with Bed Leveling

[wanton slate]

@urban cave try it

@urban cave install cura the go to

put these ther in C:\Users\YOUR USER\AppData\Roaming\cura\5.8\definition_changes

C:\Users\YOUR USER\AppData\Roaming\cura\5.8\machine_instances

and thats it

https://github.com/Ultimaker/Cura/releases/download/5.8.0/UltiMaker-Cura-5.8.0-win64-X64.exe and here is the newest version of cura

[wanton slate]

and these are optimized for the pro variant so dont worry

[urban cave]

Ok

I will try

[wanton slate]

just download it

till cura opens

and then put these files in the right files

[urban cave]

allrighjt

I might use some glue

cuz the plastic in not really attaching to the base

is priting right now

I divived it in two parts

but it hardly doing the base

[wanton slate]

use 3d lac

instead if glue

[urban cave]

That a heating bed

is good?

@normal owl said to do not usig it

[wanton slate]

3d lac is better

i think he never used it

u tested these for my self

and please use 3d lac

[urban cave]

I will see

How much is it

is cost a lot?

And why when i am toucing the motors with my hands, i hear a low volume high frequency in my pc hearphones

Is that normal or my pc has no ground loop filering

[normal owl]

you can use it of you have issues with it sticking

[wanton slate]

Did you got cura

@urban cave

[urban cave]

Well i have

[urban cave]

I install it later

As i can see is like creality slicer

it has the same ui

[wanton slate]

it is the newer version of creality slicer

creality is just the copy

[wanton slate]

and why everytime later

[urban cave]

I want to print this stuff first

Is going good for the moment

[wanton slate]

you can do it while it prints

[urban cave]

I constantly need to whatch

[urban cave]

ok

Send me download

[wanton slate]

already did

[wanton slate]

all up her

[urban cave]

https://ultimaker.com/it/software/ultimaker-cura/

This?

[wanton slate]

@urban cave

[wanton slate]

this

[urban cave]

Is the same file?

[wanton slate]

look at my text and do excactly what they say

[urban cave]

ok

I've see prusa

[wanton slate]

yes but the link upp there is the newest version

[urban cave]

Why you guys hate creality slicer

[wanton slate]

uswefzisuejdjhgvshdfoigufe

[urban cave]

tbh for me is good enuth

[wanton slate]

HOW MANY TIMES I HAVE TO SAY THIS

[urban cave]

Ok

I download it

[wanton slate]

IT IS A OLDER VERSION OF CURA

[wanton slate]

great do the set up

or if u want call me

and do screen sharing

@urban cave

vc call

[urban cave]

ok

[wanton slate]

here these

[urban cave]

thx

DOe

now?

k

[turbid reef]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[urban cave]

https://www.amazon.it/3DLAC-Adhesive-Stick-3D-Printing/dp/B09R4T5WPB/ref=sr_1_4?__mk_it_IT=ÅMÅŽÕÑ&crid=2YREVNFU817LY&dib=eyJ2IjoiMSJ9.lr-bqcTb0n-zuN8BK8gqpMI22iS9-NRAw0gUnY_PR3E1xYAlSdr8qNUWBTDQ7XnSc8A5sW4U9Wy0MPmTI0olWqj-VUUMCgM2RvZWJ5_zBDD5XvffoOpx--smgFT0IcEMsNWkuagxQRoC_bJ_jrNvt3K-1nK9TdLk9VsCPNtbI7o.FD8GeJjJ8T5EcjWXRUPAP3_chBfIaQLzJ73ndg3BBrg&dib_tag=se&keywords=3d+lac&qid=1724400005&sprefix=%2Caps%2C95&sr=8-4

Hey guys, i was seaching for this 3d lac, is this one good?

I might buy one

[normal owl]

looks like the thing he wanted

[urban cave]

Is the cheapies one i could find

I will buy it later, i am not at home rn, should come tomorrow

[turbid reef]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[urban cave]

https://www.youtube.com/watch?v=dyAR2Y9nfmQ

Worth it?

[normal owl]

not until you get the basics I would say

[urban cave]

ok

[turbid reef]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[turbid reef]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[urban cave]

GUYS I HAVE ANOTHER PROBLRM

Now is the printer

[normal owl]

?

[urban cave]

Im sending vid now

Pls listen all

[normal owl]

like yesterday there was a guy in #✅｜help-quick-questions with the same issue, i dont think he found a solve tho, but now looking at it could the issue be the gear just being too small to have enough contact points with the filament so it can easily eat thru the filament

[urban cave]

Yes

I was thinking that

Is there a way to fix this or to buy a new one with better gears?

How is that part called btw

[normal owl]

I am not home so I can check but I think that compared to yours my extruder feeder looks more like this

[urban cave]

Whats mine?

The right one?

[normal owl]

the left one

[urban cave]

So yours is better?

[normal owl]

also the measuring tool is called callipers

[urban cave]

How i can buy or change

[urban cave]

Yep

I didn't know it in eglish

[normal owl]

I think that yours is has too little contact points

[urban cave]

How is that filament motor part called

[urban cave]

Is bad?

[normal owl]

could you try to get a sharper photo from the top please, of the filament feeder

[urban cave]

wdym

Thats how that part is called?

[normal owl]

yep

filament/extruder feeder

[urban cave]

K

Ley me make photo with max photo settighs

btw it almost finished the print

Is printer good somehow bro

The first layer all good without imprecisions somehow

@normal owl

[normal owl]

thx

[urban cave]

I can chage that gold thing?

Or is permanent

[normal owl]

there should be few screws holding it on the motor shaft

[urban cave]

u mean this ones?

[normal owl]

no, directly on the bronze gear

[urban cave]

ohh

i see it

[normal owl]

can you send me the code for the part that failed

[urban cave]

What part?

It is the same file

but i cut the part that it reached

[normal owl]

oh, well any gcode that had the issue

[urban cave]

but i had to stop it cuz of the gear

cuz i diidnt know how to fix it yet

[urban cave]

Only this one

I never had problems with tiny models

[wanton slate]

I ise the more expensive bit its onöy the size

[urban cave]

it seems the is hard for the pirnter to print bigger models

[urban cave]

Is the cheapiest one in my amazon italy

Ithere is no in temu of that spray

[normal owl]

well it could have an issue with fast retractions

[urban cave]

What means

I need to speed up the machine?

[normal owl]

send me the gcode, of I see the issue i could show you more easily

[urban cave]

okk

but how to fix the filament thing

[normal owl]

if the issue is retractions you can limit them in slicer or try to make some modifications to the feeder

[urban cave]

?

So is not the probem of the printer'?

[normal owl]

could be, you would have to maybe look closer and remove some parts so that will wait till the print it done

[urban cave]

Almsot done

Where i need to check later

[normal owl]

Well look if the silver gear is correctly opposing the brass one

Could be also just the spool being a bit tangled so it just binds into the filament

[urban cave]

Hmm

I dont understand but ok xd

you have a vid or image of what i should need to do?

[normal owl]

Uh don’t have the means to explain it better now, Google
creality feeder stuck
Tangled filament

[urban cave]

Alsmot finished

[urban cave]

ok

[normal owl]

Is the other part the same just mirrored?

[urban cave]

I searche better tomorrow

[urban cave]

No it is almost the same

but it has a hole for the white in the right center

[normal owl]

And there are some upgrades to the feeder that has two opposing gears with teeth but for that you would have to ask someone else if it’s worth it

[urban cave]

can u send me the link

So the problem is the gear?

[normal owl]

The whole construction isn’t the best

[urban cave]

bruh

So how to fix that think i am confused

I need to buy a better gear?

[normal owl]

Idk it could help it

[urban cave]

Allright i will search more tomorrow

[normal owl]

👍

[urban cave]

Hey pokus, i see you are liking this server

[normal owl]

Ye

[urban cave]

u knew this server before?

Looks good for me

[normal owl]

Yep

[urban cave]

I will print part 2 tomorrow

Hopefully it WILL print it

[turbid reef]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[urban cave]

Almost there

[turbid reef]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[urban cave]

Hey guys, this is the final product

[normal owl]

?help

[turbid reef]

BenchyBot

BetaCommands:
  add_printer  Adds a printer to your name.
  belt_freq    Calculates target belt frequency (Hz) for correct tension base...
  belt_tension Calculates the tension (N) in a GT belt based on the measured...
  pi           
  random_thing Find a random thing from thingiverse.
  time         Used to get the current time in a timezone.
  topic        
GCode:
  mg           Used to search Marlin Gcode Commands.
HelpForum:
  solved       
​No Category:
  help         Shows this message

Type ?help command for more info on a command.
You can also type ?help category for more info on a category.

[normal owl]

use solved

[urban cave]

Nah bro

It will deleted this therad

I want to save this

Btw it will be auto closed but not deletedi in 1 hour