#issue with my 3d printer, I don't know how to fix " how to take off CRTOUCH"

1 messages · Page 1 of 1 (latest)

tiny sinew
#

Everything I brought the new stepping motor.. and now hotend from Amazon that made from creality, and I just update my 3d printer and how can I fix that problem?

  1. To start printing my thing, it turn off the heat and lock the stepper

  2. Auto home, it did the same thing

And I never use level bed before, I don't have CRTouch , it can be maybe update or something

rn_image_picker_lib_temp_486c8609-5b82-4faf-a18d-28c2761d941e.jpg
shell brambleBOT
#
AI Help

It sounds like you may be experiencing issues with your new components and the firmware update on your 3D printer. Here are some steps you can take to troubleshoot your issues:

  1. Check the connections: Make sure that all the connections for the new parts (stepper motor and hotend) are properly seated and secure. Loose connections can cause issues with heating and movement.

  2. Check the firmware settings: Verify that the firmware update was successful and that the settings for the new components are correct. You may need to adjust the settings for the stepper motor and hotend in the firmware configuration.

  3. Check the power supply: Ensure that your power supply is providing enough power to properly heat the hotend and drive the stepper motor. Insufficient power can lead to issues with heating and movement.

  4. Bed leveling: While not directly related to your current issues, ensuring that your printer bed is properly leveled is important for successful 3D printing. You can manual...

WARNING: This response is AI generated and may contain errors.
tiny sinew
#

I test z , it still work