#X1C mistakenly giving 1st layer error

1 messages · Page 1 of 1 (latest)

timber panther
#

I recently moved my X1C and it's been giving me weird problems ever since. The most recent is that it's claiming first layer errors (two prints in a row) when I don't see anything wrong. What could be causing this?

quiet skyBOT
#
AI Help

There could be several reasons for first layer errors, including bed leveling issues, uneven build surface, improper extrusion settings, or a clogged nozzle. Check your bed leveling, clean the build surface, adjust your extrusion settings, and consider performing a cold pull to clear any potential nozzle clogs.

WARNING: This response is AI generated and may contain errors.
timber panther
#

And this is why AI isn't that helpful.

rose idol
#

does the layer has some artifacts or defects?

#

got an error code?

timber panther
#

No error code. It didn't specify. I didn't see any defects or artifacts.

#

Well, maybe it gave an error code, but I didn't notice one

#

Just checked the print and it's going fine, as far as I can see

rose idol
forest musk
#

Did you tried to clean the lidar cam?

timber panther
#

I did not, but I will.

forest musk
#

With time it can be dirty and fail to analyse correctly, I had to do it recently but I had a message.
And since you moved your printer I would redo the auto tests and auto calibration of the printer

rose idol
#

Also be careful when cleaning the optics of the sensor

forest musk
rose idol
forest musk