corexy trying to move like a cartesian | 3D Printing | Page 1

oblique ferry Jul 28, 2024, 8:28 PM

#

i just built my first corexy, and im having problems with my klipper config, as my printer goes diagonally on force moves, because it only turns one motor, acting like its configured for cartesian, when i set corexy in the [printer] section

blazing hazelBOT Jul 28, 2024, 8:28 PM

#

oblique ferry i just built my first corexy, and im having problems with my klipper config, as ...

#

AI Help

It sounds like the motor mapping in your Klipper configuration might be incorrect for your CoreXY setup. I recommend checking your motor assignments and the order of your motor connections in the config file. Make sure that the motors are properly configured for CoreXY movement and that they work together for diagonal movements. Also, confirm that your belt and pulley mechanisms are correctly set up to move the printhead in the intended CoreXY fashion. Double-checking these settings should help resolve the issue.

oblique ferry Jul 28, 2024, 8:44 PM

#

turns out force move in klipper only moves 1 stepper

glass apex Jul 28, 2024, 10:27 PM

#

oblique ferry turns out force move in klipper only moves 1 stepper

post your config and or klippy.log. If you want help, provide more information

oblique ferry Jul 28, 2024, 11:22 PM

#

oblique ferry turns out force move in klipper only moves 1 stepper

i meant my problem is solved, there was nothing wrong its just force move is per stepper only

#corexy trying to move like a cartesian