Please Help me

[spiral socket]

Can smb please give my any advice on how to remove that first layer of some supports off of my base plate. I already tried scraping it off (I'm using a Ender 3 v3 Se)
bending it wont work, its to small

[vapid lynx]

AI Help

You can try using a pair of needle-nose pliers to gently grab and pull the support material off the base plate. If that doesn't work, using a small heat gun or a hairdryer to soften the support material before attempting to remove it may help. Just be careful not to overheat the base plate or the printed object.

WARNING: This response is AI generated and may contain errors.

[gritty salmon]

do you have a spatula?

[spiral socket]

already tried that

[gritty salmon]

doesnt work?

[spiral socket]

no

its just one layer

and that pla sticks top hard to my plate

[gritty salmon]

maybe someone with more experience knows better for me the spatula works i just try to get the corner under that

[spiral socket]

thanks, ill try that again

[quaint jolt]

2 other options, put some IPA on it and try to get it to seep under the print, or print over it again with someething and it should come off with that

[spiral socket]

thanks

ill try that

[serene crown]

just print over it like @quaint jolt said