#Having trouble building Marlin on 2.1.2.4

1 messages · Page 1 of 1 (latest)

inland heath
#

I have tried a few different times to build a marlin configuration for a BTT SKR Mini e3 i have. The errors I’m getting are making me think I have some sort of problem with Some random lines of Firmware that have to do with Serial Ports… not sure. I am using Auto Build Marlin in VS code to build, please let me know what is going on. I haven’t touched anything that think would cause these errors to pop up only been in the config.h and config_adv.h files nothing else and it is directing me towards a buried serial.h in the error directory.

Here is a photo of the error message(s) below

IMG_6860.jpg
unkempt nacelleBOT
#
AI Help

It sounds like there may be a conflict or mismatch between the settings in your configuration files and the platform you are compiling for. The errors related to Serial Ports usually indicate an issue with the way the serial communication is configured in the firmware.

First, try checking if you have selected the correct board and processor in the platformio.ini file. Make sure that the settings in the configuration files (config.h and config_adv.h) correspond to the specific board and hardware you are using.

If the issue persists, I recommend checking the Marlin firmware repository on GitHub for any known issues or troubleshooting steps related to the BTT SKR Mini E3 board. You may also consider asking for help on forums or online communities dedicated to 3D printing and Marlin firmware development.

If you provide specific error messages or lines of code, feel free to share them, and I can try to provide more targeted assistance in resolving the issue.

WARNING: This response is AI generated and may contain errors.
inland heath
#

I’m not sure how these help forums work, I am watch a Thomas Sanladerer video but it is 1.1 and he is using ardunio ide

unkempt nacelleBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

inland heath
#

please help me

#

I am in US eastern timezone so I'm going to be asleep for a bit

raven pier
unkempt nacelleBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

inland heath
raven pier
#

Kinda personal but I guess something in that thread workedvaulthah