ender 3 v3 ke cant print without glue

[near cairn]

Every time I print without glue, my prints get ruined. It is supposed that on a textured bed you don't need glue, and my bed leveling doesn't seem that bad. Am I doing something wrong? Currently, I am printing with PLA on Creality Print (although I will switch to Cura) at 195 Celsius and 70 speed and bed 60 celsius

[lunar garden]

AI Help

It is possible that your bed is not properly leveled even if it seems okay. Make sure to re-check and adjust the bed leveling to ensure the nozzle is at the correct distance from the bed. Additionally, you can try increasing the bed temperature slightly (around 60-65°C) to help with adhesion. It's also worth experimenting with different print speeds and temperatures to find the optimal settings for your specific printer and filament. Good luck with your prints!

WARNING: This response is AI generated and may contain errors.

[frozen glen]

Maybe increase temp for first layer?? 195 for PLA seems low imo, have u done temp calibration??

[near cairn]

temp calibration? do you mean calibration tower with temperatures?

[frozen glen]

Ye

[near cairn]

yes 195 is better from 200+

[frozen glen]

huh, might as well try to up the temp for the first layer

[near cairn]

ok

I have a 0.4 nozzle and print at 0.10, should I increase it to 0.20 for the first layer?

[frozen glen]

Oh yeah, that would also help

[near cairn]

its already in 210

[frozen glen]

Oh damn, then see how that chage in layer height on first layer does

[near cairn]

I just did it, I hope it works

[frozen glen]

If that doesnt work, im out of ideas, I had a similar problem while also using a textured plate and the only way I solved it was using hairspray :/

[near cairn]

lol I using UHU