validation matrix is see through | 3D Printing | Page 1

timid spindle Jun 20, 2024, 1:46 AM

#

I used the recommended burn in layers of 4 and everything and my exposure is great but the print is see through. Using sunlu abs like solid black. Printer is a mars 4 uktra. Peels great, looks great just the opacity isn't solid. I have seen this same test done with my exact resin and it was not see through

rn_image_picker_lib_temp_177d5393-a496-445e-b87d-288505639a9d.jpg

harsh charmBOT Jun 20, 2024, 1:46 AM

#

timid spindle I used the recommended burn in layers of 4 and everything and my exposure is gre...

#

AI Help

It sounds like the transparency issue you are experiencing could be due to inadequate curing or incorrect exposure settings. Try increasing the exposure time slightly to ensure that the resin is fully cured and check if the UV light source is functioning properly. Additionally, make sure the resin tank is clean and that the build plate is correctly calibrated. If the issue persists, you may need to consult the manufacturer or online forums for further troubleshooting.

harsh charmBOT Jun 20, 2024, 3:46 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

timid spindle Jun 20, 2024, 4:50 AM

#

?solved

#validation matrix is see through