#Supports and/or Removing Them

1 messages · Page 1 of 1 (latest)

merry wolf
#

https://www.thingiverse.com/thing:6058137#Print Settings

I printed it vertically as recommended by the uploader and I used everywhere selection for support placements. Would it be better if I used a different support or none at all for this print? I'm having trouble removing supports with my pliers. Should I just use smaller pliers? Or should I just reprint it? Because the quality of the print isn't like the one in thingiverse photos.

20240619_151758.jpg 20240619_150137.jpg large_display_2977773a-050e-4115-88a5-b943525d4c3c.jpg
west flowerBOT
#
AI Help

It depends on the specific model and your printer's capabilities. If you are having trouble removing the supports with pliers, you could try using smaller or more precise tools like tweezers or an X-Acto knife. If the print quality is not as expected, you may want to consider adjusting the print settings such as layer height, printing temperature, or infill percentage. Reprinting with different support settings or without supports altogether could also yield better results. Ultimately, experimentation and iteration are key to achieving the desired outcome.

WARNING: This response is AI generated and may contain errors.
stiff mantle
#

Different orientation should leave better results. Basically leave all details facing up so no support has to touch them