Getting started painting

[smoky tapir]

Hello guys!!

I printed these two guys a few months ago ago and I finally have time to work with them again!

I was suggested to prime them since they are a cosplay which will be used a lot but I’m not sure where to start including what primer I should but..

I’ve done all the sanding! But how many coats of primer should I use before I start painting?

I would also like to know if I should prime on top of the paint

[clever turtle]

AI Help

Hello! I'm glad to hear you're working on your cosplay project.

For priming 3D printed models, it's recommended to use a spray primer that is suitable for plastics. You can find primers specifically designed for 3D printing, which adhere well to the surface and provide a smooth base for painting.

As for the number of coats, it's generally recommended to apply 2-3 thin layers of primer, allowing each coat to dry completely before applying the next one. This will help ensure an even and solid base for painting.

Once you've primed your models and painted them, you shouldn't need to prime on top of the paint. Just make sure to apply a clear protective coat or varnish over the painted surface to help protect the paint job from wear and tear.

If you have any more questions or need further assistance with your cosplay project, feel free to ask.

WARNING: This response is AI generated and may contain errors.

[smoky tapir]

after every layer should i be sanding? for example i've done my first layer of primer should i sand? then repeat it two more times... sand prime sand prime

[clever turtle]

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

[smoky tapir]

what...