How to fix that? | 3D Printing | Page 1

rigid phoenix Jun 1, 2024, 12:25 PM

#

HELP, cura dont print corectly model

queen mortarBOT Jun 1, 2024, 12:25 PM

#

rigid phoenix HELP, cura dont print corectly model

#

AI Help

Some common issues with printing models in Cura include incorrect settings, model design errors, or problems with the printer itself. I would recommend checking your slicing settings in Cura to ensure they are set correctly for your printer and filament. You may also want to check the model itself for any issues that could be causing printing errors. If the problem persists, it could be a hardware issue with your printer that may require further troubleshooting or maintenance. Let me know if you need more specific guidance on any of these steps.

errant haven Jun 1, 2024, 12:28 PM

#

Broken model, make sure the surface is closed. You can load the model in 3D Builder to let it try to autofix it

rigid phoenix Jun 1, 2024, 12:30 PM

#

Ok, wait, i donwload the 3d builder and try it

#

Nah, it didn't work

errant haven Jun 1, 2024, 2:08 PM

#

rigid phoenix Nah, it didn't work

The left thing is supposed to be hollow?

#

If so the wall thickness might be to thin for the slicer

rigid phoenix Jun 1, 2024, 3:43 PM

#

errant haven The left thing is supposed to be hollow?

I allready fix that, but thanks for the effort

errant haven Jun 1, 2024, 3:54 PM

#

Type ?solved please

#

@rigid phoenix

#How to fix that?