#printer keeps creating squiggly lines while printing

1 messages · Page 1 of 1 (latest)

strong mortarBOT
#
AI Help

It seems like the issue you're experiencing is related to the quality of your 3D print. The squiggly lines you're seeing are likely due to issues like under-extrusion, incorrect print settings, or a problem with the model itself. Here are some steps you can take to troubleshoot:

  1. Check your filament: Make sure your filament is loaded correctly, not tangled, and has a consistent diameter. Inconsistent filament can cause printing issues.

  2. Adjust print settings: Ensure your printer settings such as layer height, print speed, and temperature are appropriate for the filament you're using. You may need to fine-tune these settings to improve print quality.

  3. Check the model: Inspect the model for any anomalies or errors that could be causing the issue. You can use a 3D modeling software to check for any issues in the model's geometry.

  4. Calibrate your printer: Properly calibrating your printer, especially the extruder steps/mm and bed leveling, can help improve print quality.

5....

WARNING: This response is AI generated and may contain errors.
strong mortarBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

median vale
#

Hey everyone I have an issue while printing with the Neptune 4 when I print a model like these uk police handcuffs i tried but I get these squiggly lines that come out in the pic below idk if its my printer or the software I tried resetting my printer a few times but that didn't fix the problem I don't know how I can set it up properly to do a good print if anyone can help me please let me know thanks from csimms link to model will be below in case anyone needs it https://www.printables.com/.../241904-fixed-speed-handcuffs

strong mortarBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

white tree
#

Is that the top of bottom side?

#

?tuning

strong mortarBOT
strong mortarBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

median vale
#

Yes

median vale
#

@white tree

median vale
strong mortarBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

median vale
#

Ok I tried messing with z axis but I get this issue in the pic below and theses are my settings in the pics as well

IMG_2113.jpg IMG_2112.jpg IMG_2109.jpg IMG_2110.jpg IMG_2111.jpg 4C9DACEE-B69B-43FD-9F4D-98EC9D69FEEB.jpg
#

If anyone can help me that would greatly appreciated

strong mortarBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

median vale
#

I figured out the issue it’s fixed

white tree
white tree
median vale
#

I just set my z axis to like 1.200 mm and it worked

strong mortarBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

white tree
#

?solved

#

Type ?solved

median vale
#

?solved