xyz cube Z fail | 3D Printing | Page 1

rocky gull May 20, 2024, 9:08 AM

#

Am not sure why my xyz cube fail at Z side, can someone help me to fix this as it looks perfect on xy.

Most of my prints fails mid printing and i assumes its something that i have to do

solid pebbleBOT May 20, 2024, 9:08 AM

#

rocky gull Am not sure why my xyz cube fail at Z side, can someone help me to fix this as i...

#

AI Help

It sounds like your Z-axis may not be moving as expected, causing the print to fail on the Z side. Check if the Z-axis screw or motor is functioning properly and if the bed is leveled correctly. As for the mid-print failures, it could be due to issues with the print settings, filament quality, or overheating. I recommend checking these factors to improve your prints.

solid pebbleBOT May 20, 2024, 11:12 AM

#

This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

vapid stump May 20, 2024, 1:13 PM

#

tighten your nozzle while it’s hot because some filament could droop from the threads. Try printing a benchy to compare, an xyz cube isn’t the best benchmark print

#xyz cube Z fail