#SOVOL SV06 SETUP HELP

1 messages · Page 1 of 1 (latest)

scenic dune
#

I have a question if someone can help me find what settings i need to change for these things, this would help me so much. I am using a calibration file to try to test the printer out and it wont print these letters properly but it print all the other text fine and what settings can i change to get of the stringing? Is it related to the zhop? Image attached for the file and the results

IMG_4713.png IMG_4711.png image.png
swift mantleBOT
#
AI Help

I'd be happy to help you troubleshoot your 3D printing issue. It sounds like you may be experiencing issues with stringing. Stringing can be caused by a few factors, including retraction settings and temperature. You can try adjusting the retraction distance, retraction speed, and possibly lowering the temperature. The Z-hop function raises the nozzle when moving to a new position which can help with stringing in certain cases, so you can also consider enabling that in your slicing software. Feel free to share more details about your setup and slicing settings for more specific advice!

WARNING: This response is AI generated and may contain errors.
scenic dune
#

The printer is a sovol sv06. I am using the sovol 3d cura 1.7.2 file and using pla plus from elegoo

swift mantleBOT
#
This post has been closed due to inactivity.

This post has been inactive for over 1 hour and so has been closed. To reopen this post simply send another message.

scenic dune
#

anyone can help?

lament remnant
swift mantleBOT
lament remnant
#

Or

swift mantleBOT
#

Teaching Tech Calibration Guide
Teaching Tech

?teachingtech requested by: m.von.d#0
lament remnant
#

Whichever you follow, keep the order or you mess up your values