weird spots on prints | creality k1

[arctic quarry]

hello! i have a creality k1 and due to school i haven't been able to print that often and recently i've been coming back to it but now there are some surface 'bumps' on my prints.

this is also my second print and the same bumpy texture appeared in the exact same spots on the first print, so i am confused as to what is happening.

i slice with prusa slicer and the surfaces look smooth on there.

what could be causing this issue?

[split ermine]

AI Help

It sounds like you may be experiencing issues with your print bed leveling causing inconsistent extrusion. The "bumps" you are seeing could be areas where the filament is not being laid down evenly.

I recommend re-leveling your print bed to ensure that the nozzle is at the correct distance from the bed across the entire surface. Additionally, check that your filament is feeding smoothly and there are no clogs in the hotend that could be causing intermittent flow.

If the issue persists, you may want to experiment with adjusting your printing temperature or flow rate to see if that improves the surface quality of your prints.

WARNING: This response is AI generated and may contain errors.